In rural areas (where buildings are further spaced apart), cellular networks are mainly deployed using lower frequency bands. Contrastingly, in suburban/urban areas, the higher frequencies are the ones typically used. Your selected antenna should be one that matches this!
In rural areas (where buildings are further spaced apart), cellular networks are mainly deployed using lower frequency bands. Contrastingly, in suburban/urban areas, the higher frequencies are the ones typically used. Your selected antenna should be one that matches this!
The proposed antenna selection was made with Lora Gateways in mind, not with lora devices/customers. If you need smaller Lora antennas, reach out to us.
In rural areas (where buildings are further spaced apart), cellular networks are mainly deployed using lower frequency bands. Contrastingly, in suburban/urban areas, the higher frequencies are the ones typically used. Your selected antenna should be one that matches this!
There are multiple ways of creating a good MIMO antenna setup. As an example: a MIMO 4×4 AP, may be connected to 4x SISO antennas, to 2x 2×2 MIMO antennas or to 1x 4×4 MIMO antenna. This antenna selection tool will present you with 4×4, 2×2 and 1×1 antenna options. For certain installation setups, it might be beneficial to go for a mix of antenna types. For an expert’s advise, please reach out to your distributor.
There are multiple ways of creating a good MIMO antenna setup. As an example: a MIMO 4×4 AP, may be connected to 4x SISO antennas, to 2x 2×2 MIMO antennas or to 1x 4×4 MIMO antenna. This antenna selection tool will present you with 4×4, 2×2 and 1×1 antenna options. For certain installation setups, it might be beneficial to go for a mix of antenna types. For an expert’s advise, please reach out to your distributor.
There are multiple ways of creating a good MIMO antenna setup. As an example: a MIMO 4×4 AP, may be connected to 4x SISO antennas, to 2x 2×2 MIMO antennas or to 1x 4×4 MIMO antenna. This antenna selection tool will present you with 4×4, 2×2 and 1×1 antenna options. For certain installation setups, it might be beneficial to go for a mix of antenna types. For an expert’s advise, please reach out to your distributor.
Choose an omnidirectional antenna for general coverage, or 360º degree coverage around the AP. Choose a directional antenna for focused coverage over distance or in areas with interference.
Choose an omnidirectional antenna for general coverage, or 360º degree coverage around the AP. Choose a directional antenna for focused coverage over distance or in areas with interference.
Choose an omnidirectional antenna for general coverage, or 360º degree coverage around the AP. Choose a directional antenna for focused coverage over distance or in areas with interference.
Choose an omnidirectional antenna for general coverage, or 360º degree coverage around the AP. Choose a directional antenna for focused coverage over distance or in areas with interference.
Choose an omnidirectional antenna for general coverage, or 360º degree coverage around the AP. Choose a directional antenna for focused coverage over distance or in areas with interference.
Choose an omnidirectional antenna for general coverage, or 360º degree coverage around the AP. Choose a directional antenna for focused coverage over distance or in areas with interference.
Choose an omnidirectional antenna for general coverage, or 360º degree coverage around the AP. Choose a directional antenna for focused coverage over distance or in areas with interference.
Choose an omnidirectional antenna for general coverage, or 360º degree coverage around the AP. Choose a directional antenna for focused coverage over distance or in areas with interference.
Choose an omnidirectional antenna for general coverage, or 360º degree coverage around the AP. Choose a directional antenna for focused coverage over distance or in areas with interference.
Answering yes takes you to a selection of directional antennas. A directional antenna typically has more gain, but can only receive /transmit towards a certain direction. Answering no, your taken to a selection of omnidirectional antennas, which receive and transmit signals 360º around them.
Flat mount antennas typically have a lower profile, but can be installed directly to a street cabinet or wherever the router/radio is. The lower profile means a lower gain, specially on the lower frequencies, mostly used to provide rural/remote coverage
Flat mount antennas typically have a lower profile, but can be installed directly to a street cabinet or wherever the router/radio is. The lower profile means a lower gain, specially on the lower frequencies, mostly used to provide rural/remote coverage
XPOL-24
A 4×4 MIMO, cross-polarized, Ultra-Wide Band (617 – 4200 MHz), Directional High Gain (11dBi) Antenna. Multiple cable and connector options.
The XPOL-24 offers wideband frequency coverage from 617 to 4200 MHz, with a peak gain of 11dBi across the bands of operation. The antenna performs exceptionally well in the following frequency bands: 617 – 960 MHz, 1710 – 2170 MHz, 2300 – 2700 MHz & 3400 – 4200 MHz.
I want to order
More Info
The XPOL-24 expands Poynting’s very popular Cross Polarised (XPOL) antenna range. The XPOL-24 is our first ever 4×4 MIMO 5G/LTE bands with exceptional performance. This is due to the incorporation of advanced metamaterial technology, making use of an Artificial Magnetic Conductor (AMC) and new registered/patent configuration, which has proven to yield exceptional improvements in bandwidth and gain. The radiation patterns of this antenna are exceptionally well controlled, which further adds to exceptional performance of the antenna. The XPOL-24 offers wideband frequency coverage from 617 to 4200 MHz, with a peak gain of 11dBi across the bands of operation. The antenna performs exceptionally well in the following frequency bands: 617 – 960 MHz, 1710 – 2170 MHz, 2300 – 2700 MHz & 3400 – 4200 MHz. The exceptional wideband performance is an important factor for 5G/LTE technologies, as these technologies rely on features such as Carrier Aggregation (CA) to provide the best possible reception and throughput over multiple frequency bands simultaneously. This makes the XPOL-24 the go to solution for current and future 5G/LTE antenna deployments.
| SKU | A-XPOL-0024-V1-01 | A-XPOL-0024-V1-02 |
|---|---|---|
| EAN | 6009710024693 | 6009710925003 |
| HS Code | 8529.10.69 (EU) 8517.71.0000 (USA) 8529.10.90 (SA & Global) |
8529.10.69 (EU) 8517.71.0000 (USA) 8529.10.90 (SA & Global) |
| Packaged Weight | 4.38kg 9.66lbs |
4.38kg 9.66lbs |
| Packaged Dimensions | 508 x 419 x120 mm 20 x 16.50 x 4.72 inch |
508 x 419 x120 mm 20 x 16.50 x 4.72 inch |
| Master Box QTY | 3 | 3 |
| Master Box Weight | 14.45kg 31.86lbs |
|
| Master Box Dimensions | 530 x 450 x 430 mm 20.87 x 17.72 x 16.93 inch |
530 x 450 x 430 mm 20.87 x 17.72 x 16.93 inch |
| Country of Origin | CN | CN |
LPDA-500
Widest Band (617 – 7200 MHz), Directional High Gain (11.5dBi) Antenna, N-Type(f) connector, with the most flexible bracket.
The LPDA-500 has consistent high-gain performance across the entire band of operation, making the antenna suitable for the deployment of various wireless communication systems. Our previous LPDA has been successfully used in extreme weather environments across the world with close to zero failures, with the new LPDA-500 being no different.
I want to order
More Info
The LPDA-500 is Poynting’s new and improved log-periodic dipole array (LPDA) antenna. The LPDA-500 is a high-gain, ultra-wideband, uni-directional antenna that operate from 617 to 7200 MHz. The ultra-wideband coverage includes current 5G and future cellular bands as well as Wi-Fi and Wi-Fi 6E bands. The LPDA-500 has consistent high-gain performance across the entire band of operation, making the antenna suitable for the deployment of various wireless communication systems. Our previous LPDA has been successfully used in extreme weather environments across the world with close to zero failures, with the new LPDA-500 being no different. The LPDA-500 comes standard with a new and improved mounting bracket, which can be rotated at 45° intervals. This will allow for ease of installation and the customer will be able to mount multiple LPDA-500 antennas and orientate them in a MIMO configuration, i.e., vertical, and horizontal or ±45°. Poynting Antennas are well known for designing future proof antennas and the new LPDA-500 is no different.
| SKU | COAX Cable Type | COAX Cable Length | Colour | Other |
|---|---|---|---|---|
| A-LPDA-0500-V1-01 | N/A | N/A | Silver |
| SKU | A-LPDA-0500-V1-01 |
|---|---|
| EAN | 6009710925447 |
| HS Code | 8529.10.69 (EU) 8517.71.0000 (USA) 8529.10.90 (SA & Global) |
| Packaged Weight | 3.34kg 7.36lbs |
| Packaged Dimensions | 1385 x 250 x 145 mm 54.53 x 9.84 x 5.71 inch |
| Master Box QTY | 4 |
| Master Box Weight | 15.36kg 33.86lbs |
| Master Box Dimensions | 1440 x 565 x 340 mm 56.69 x 22.24 x 13.39 inch |
| Country of Origin | CN |
LPDA-500
High-gain Directional Antenna, 11dBi, 30º V/H aperture.
The LPDA-500 is a dual-band directional antenna, that may also be used as a 2.4GHz, or 5GHz, only antenna. At 2.4GHz the antenna has a 11dBi peak gain and 30º V/H apertures.
I want to order
More Info
The LPDA-500 is Poynting’s new and improved log-periodic dipole array (LPDA) antenna. The LPDA-500 is a high-gain, ultra-wideband, uni-directional antenna that operate from 617 to 7200 MHz. The ultra-wideband coverage includes current 5G and future cellular bands as well as Wi-Fi and Wi-Fi 6E bands. The LPDA-500 has consistent high-gain performance across the entire band of operation, making the antenna suitable for the deployment of various wireless communication systems. Our previous LPDA has been successfully used in extreme weather environments across the world with close to zero failures, with the new LPDA-500 being no different. The LPDA-500 comes standard with a new and improved mounting bracket, which can be rotated at 45° intervals. This will allow for ease of installation and the customer will be able to mount multiple LPDA-500 antennas and orientate them in a MIMO configuration, i.e., vertical, and horizontal or ±45°. Poynting Antennas are well known for designing future proof antennas and the new LPDA-500 is no different.
| SKU | COAX Cable Type | COAX Cable Length | Colour | Other |
|---|---|---|---|---|
| A-LPDA-0500-V1-01 | N/A | N/A | Silver |
| SKU | A-LPDA-0500-V1-01 |
|---|---|
| EAN | 6009710925447 |
| HS Code | 8529.10.69 (EU) 8517.71.0000 (USA) 8529.10.90 (SA & Global) |
| Packaged Weight | 3.34kg 7.36lbs |
| Packaged Dimensions | 1385 x 250 x 145 mm 54.53 x 9.84 x 5.71 inch |
| Master Box QTY | 4 |
| Master Box Weight | 15.36kg 33.86lbs |
| Master Box Dimensions | 1440 x 565 x 340 mm 56.69 x 22.24 x 13.39 inch |
| Country of Origin | CN |
XPOL-2-5G
A 2×2 MIMO, cross-polarized LTE/5G, Ultra-Wide Band (617 – 4200 MHz). Multiple cable and connector options.
The XPOL-2-5G antenna includes the newer 3400 – 4200 MHz bands, which were not previously covered by our V2 and is suitable for 2G, 3G, 4G & 5G. This antenna performs exceptionally well in the following frequency bands: 617 – 960 MHz, 1710 – 2170 MHz, 2300 – 2700 MHz & 3400 – 4200 MHz in addition to the new bands, the gain in the 1700 MHz and 2.7 GHz is around 3 dB higher than the “V2” over the same frequency bands!
I want to order
More Info
The XPOL-2-5G is Poynting’s third generation “V3” of this very popular Cross Polarised (XPOL), cellular band, 2×2 MIMO antenna. The antenna enclosure effectively looks the same as the second generation “V2” but has been completely redesigned on the inside. We have used advanced metamaterial technology, making use of Artificial Magnetic Conductors (AMC) and new registered/patent pending radiator configuration, which is proving to yield exceptional improvements in bandwidth and gain. Radiation patterns of this antenna are exceptionally well controlled, further adding to the performance of the antenna. The XPOL-2-5G antenna includes the newer 3400 – 4200 MHz bands, which were not previously covered by our V2 and is suitable for 2G, 3G, 4G & 5G. This antenna performs exceptionally well in the following frequency bands: 617 – 960 MHz, 1710 – 2170 MHz, 2300 – 2700 MHz & 3400 – 4200 MHz in addition to the new bands, the gain in the 1700 MHz and 2.7 GHz is around 3 dB higher than the “V2” over the same frequency bands! Our “V2” antenna already outperformed most competitors over these bands, so this substantial improvement in gain shows the benefits of the new advanced materials and novel radiator design. So, if it was a car, we installed an entirely new technology engine producing twice the power under the bonnet – it may look the same, but just wait until you turn the ignition on!
| SKU | COAX Cable Type | COAX Cable Length | Colour | Other |
|---|---|---|---|---|
| A-XPOL-0002-V3-01 | Twin HDF-195 | 5m | White | |
| A-XPOL-0002-V3-02 | N/A | N/A | White | |
| A-XPOL-0002-V3-03 | Twin HDF-195 | 10m | White |
| SKU | A-XPOL-0002-V3-01 | A-XPOL-0002-V3-02 | A-XPOL-0002-V3-03 |
|---|---|---|---|
| EAN | 6009880915750 | 6009710920107 | 6009710920121 |
| HS Code | 8529.10.69 (EU) 8517.71.0000 (USA) 8529.10.90 (SA & Global) |
8529.10.69 (EU) 8517.71.0000 (USA) 8529.10.90 (SA & Global) |
8529.10.69 (EU) 8517.71.0000 (USA) 8529.10.90 (SA & Global) |
| Packaged Weight | 1.98kg 4.37lbs |
1.86kg 4.1lbs |
2.3kg 5.07lbs |
| Packaged Dimensions | 375x267x100mm 14.76×10.51×3.94inch |
375x267x120mm 14.76×10.51 x4.72 inch |
375x267x100mm 14.76×10.51×3.94inch |
| Master Box QTY | 10 | 8 | 10 |
| Master Box Weight | 22.7kg 50.04lbs |
19kg 41.89lbs |
24.07kg 53.07lbs |
| Master Box Dimensions | 550 x 390 x 500mm 21.65 x 15.35 x 19.67 inch |
550 x 390 x 500mm 21.65 x 15.35 x 19.67 inch |
550 x 390 x 500mm 21.65 x 15.35 x 19.67 inch |
| Country of Origin | CN | CN | CN |
LPDA-92
Ultra-Wide Band (690 – 3800 MHz), Directional High Gain (12dBi) Antenna, 7m HDF-195 cable, w/ SMA (m) connector.
This antenna is unique in its combination of ultra-wide-band operator with a consistent high-gain performance. It has been successfully used in extreme weather environments in Africa and Europe with close to zero failures.
I want to order
More Info
This high-gain, wideband, directional antenna covers all international cellular, mobile and wireless data bands including GSM 900/ GSM1800/UMTS/LTE bands. It also covers the extended cellular and WiMAX bands such as European/USA “Digital Dividend bands” and 2.3- 2.7GHz licensed and unlicensed data bands. Its configuration is suitable for various wireless communications systems. This antenna is unique in its combination of ultra-wide-band operator with a consistent high-gain performance. It has been successfully used in extreme weather environments in Africa and Europe with close to zero failures. A firm favourite, in any area where operators are having signal challenges. It is ideal for any application using the GSM network (LTE/ HSPA/3G/EDGE/GPRS).
| SKU | COAX Cable Type | COAX Cable Length | Colour | Other |
|---|---|---|---|---|
| A-LPDA-0092 | HDF-195 | 7m | Silver | |
| A-LPDA-0092-04 | HDF-195 | 0.3m | Silver | |
| A-LPDA-0092-04-LTE | HDF-195 | 0.5m | Silver | |
| A-LPDA-0092 | HDF-195 | 0.3m | Silver | |
| A-LPDA-0092-30-LTE | HDF-195 | 7m | Silver |
| SKU | A-LPDA-0092 | A-LPDA-0092-04 |
|---|---|---|
| EAN | 6009710921166 | 6009710921722 |
| HS Code | 8529.10.69 (EU) 8517.71.0000 (USA) 8529.10.90 (SA & Global) |
8529.10.69 (EU) 8517.71.0000 (USA) 8529.10.90 (SA & Global) |
| Packaged Weight | 2.02kg 4.45lbs |
1.93kg 4.25lbs |
| Packaged Dimensions | 1120 x 210 x 60 mm 44.09 x 8.27 x 2.36. inch |
1120 x 210 x 60 mm 44.09 x 8.27. x 2.36.inch |
| Master Box QTY | 10 | 10 |
| Master Box Weight | 20.02kg 44.14lbs |
19.37kg 42.7lbs |
| Master Box Dimensions | 1140 x 435 x 330 mm 44.88 x 17.13 x 13 inch |
1125 x 430 x 330 mm 44.29 x 16.93 x 13 inch |
| Country of Origin | RSA | CN |
LPDA-500
High-gain Directional Antenna, 11dBi, 30º V/H aperture.
The LPDA-500 is a dual-band directional antenna, that may also be used as a 2.4GHz, or 5GHz, only antenna. At 2.4GHz the antenna has a 11dBi peak gain and 30º V/H apertures.
I want to order
More Info
The LPDA-500 is Poynting’s new and improved log-periodic dipole array (LPDA) antenna. The LPDA-500 is a high-gain, ultra-wideband, uni-directional antenna that operate from 617 to 7200 MHz. The ultra-wideband coverage includes current 5G and future cellular bands as well as Wi-Fi and Wi-Fi 6E bands. The LPDA-500 has consistent high-gain performance across the entire band of operation, making the antenna suitable for the deployment of various wireless communication systems. Our previous LPDA has been successfully used in extreme weather environments across the world with close to zero failures, with the new LPDA-500 being no different. The LPDA-500 comes standard with a new and improved mounting bracket, which can be rotated at 45° intervals. This will allow for ease of installation and the customer will be able to mount multiple LPDA-500 antennas and orientate them in a MIMO configuration, i.e., vertical, and horizontal or ±45°. Poynting Antennas are well known for designing future proof antennas and the new LPDA-500 is no different.
| SKU | COAX Cable Type | COAX Cable Length | Colour | Other |
|---|---|---|---|---|
| A-LPDA-0500-V1-01 | N/A | N/A | Silver |
| SKU | A-LPDA-0500-V1-01 |
|---|---|
| EAN | 6009710925447 |
| HS Code | 8529.10.69 (EU) 8517.71.0000 (USA) 8529.10.90 (SA & Global) |
| Packaged Weight | 3.34kg 7.36lbs |
| Packaged Dimensions | 1385 x 250 x 145 mm 54.53 x 9.84 x 5.71 inch |
| Master Box QTY | 4 |
| Master Box Weight | 15.36kg 33.86lbs |
| Master Box Dimensions | 1440 x 565 x 340 mm 56.69 x 22.24 x 13.39 inch |
| Country of Origin | CN |
LPDA-92
Ultra-Wide Band (690 – 3800 MHz), Directional High Gain (12dBi) Antenna, 7m HDF-195 cable, w/ SMA (m) connector.
This antenna is unique in its combination of ultra-wide-band operator with a consistent high-gain performance. It has been successfully used in extreme weather environments in Africa and Europe with close to zero failures.
I want to order
More Info
This high-gain, wideband, directional antenna covers all international cellular, mobile and wireless data bands including GSM 900/ GSM1800/UMTS/LTE bands. It also covers the extended cellular and WiMAX bands such as European/USA “Digital Dividend bands” and 2.3- 2.7GHz licensed and unlicensed data bands. Its configuration is suitable for various wireless communications systems. This antenna is unique in its combination of ultra-wide-band operator with a consistent high-gain performance. It has been successfully used in extreme weather environments in Africa and Europe with close to zero failures. A firm favourite, in any area where operators are having signal challenges. It is ideal for any application using the GSM network (LTE/ HSPA/3G/EDGE/GPRS).
| SKU | COAX Cable Type | COAX Cable Length | Colour | Other |
|---|---|---|---|---|
| A-LPDA-0092 | HDF-195 | 7m | Silver | |
| A-LPDA-0092-04 | HDF-195 | 0.3m | Silver | |
| A-LPDA-0092-04-LTE | HDF-195 | 0.5m | Silver | |
| A-LPDA-0092 | HDF-195 | 0.3m | Silver | |
| A-LPDA-0092-30-LTE | HDF-195 | 7m | Silver |
| SKU | A-LPDA-0092 | A-LPDA-0092-04 |
|---|---|---|
| EAN | 6009710921166 | 6009710921722 |
| HS Code | 8529.10.69 (EU) 8517.71.0000 (USA) 8529.10.90 (SA & Global) |
8529.10.69 (EU) 8517.71.0000 (USA) 8529.10.90 (SA & Global) |
| Packaged Weight | 2.02kg 4.45lbs |
1.93kg 4.25lbs |
| Packaged Dimensions | 1120 x 210 x 60 mm 44.09 x 8.27 x 2.36. inch |
1120 x 210 x 60 mm 44.09 x 8.27. x 2.36.inch |
| Master Box QTY | 10 | 10 |
| Master Box Weight | 20.02kg 44.14lbs |
19.37kg 42.7lbs |
| Master Box Dimensions | 1140 x 435 x 330 mm 44.88 x 17.13 x 13 inch |
1125 x 430 x 330 mm 44.29 x 16.93 x 13 inch |
| Country of Origin | RSA | CN |
LPDA-500
Widest Band (617 – 7200 MHz), Directional High Gain (11.5dBi) Antenna, N-Type(f) connector, with the most flexible bracket.
The LPDA-500 has consistent high-gain performance across the entire band of operation, making the antenna suitable for the deployment of various wireless communication systems. Our previous LPDA has been successfully used in extreme weather environments across the world with close to zero failures, with the new LPDA-500 being no different.
I want to order
More Info
The LPDA-500 is Poynting’s new and improved log-periodic dipole array (LPDA) antenna. The LPDA-500 is a high-gain, ultra-wideband, uni-directional antenna that operate from 617 to 7200 MHz. The ultra-wideband coverage includes current 5G and future cellular bands as well as Wi-Fi and Wi-Fi 6E bands. The LPDA-500 has consistent high-gain performance across the entire band of operation, making the antenna suitable for the deployment of various wireless communication systems. Our previous LPDA has been successfully used in extreme weather environments across the world with close to zero failures, with the new LPDA-500 being no different. The LPDA-500 comes standard with a new and improved mounting bracket, which can be rotated at 45° intervals. This will allow for ease of installation and the customer will be able to mount multiple LPDA-500 antennas and orientate them in a MIMO configuration, i.e., vertical, and horizontal or ±45°. Poynting Antennas are well known for designing future proof antennas and the new LPDA-500 is no different.
| SKU | COAX Cable Type | COAX Cable Length | Colour | Other |
|---|---|---|---|---|
| A-LPDA-0500-V1-01 | N/A | N/A | Silver |
| SKU | A-LPDA-0500-V1-01 |
|---|---|
| EAN | 6009710925447 |
| HS Code | 8529.10.69 (EU) 8517.71.0000 (USA) 8529.10.90 (SA & Global) |
| Packaged Weight | 3.34kg 7.36lbs |
| Packaged Dimensions | 1385 x 250 x 145 mm 54.53 x 9.84 x 5.71 inch |
| Master Box QTY | 4 |
| Master Box Weight | 15.36kg 33.86lbs |
| Master Box Dimensions | 1440 x 565 x 340 mm 56.69 x 22.24 x 13.39 inch |
| Country of Origin | CN |
MIMO-4-4
Ultra Wideband (617-6000MHz), 4X4 MIMO LTE/5G. High Performance Omni-directional Antennas in our traditional PUCK design (slightly bigger).
The natural upgrade from our well stablished PUCK antennas. The bigger size allows more room for bigger antennas, hence improved performance and reach. Rugged, weather-proof and with Multiple Mounting Options.
I want to order
More Info
The MIMO-4-4 is a 4-in-1 high-performance, multi-frequency antenna with four cellular antennas within a single housing. The four cellular MIMO antennas offer wideband coverage from 617 to 6000 MHz, covering contemporary LTE/4G and 5G bands for future-proof implementation. The ultra-wideband performance of the cellular antennas allows it to be used across different operators and technologies and is ready for future cellular technologies up to 6 GHz for 5G applications. The MIMO-4-4 exceeds the performance of most competitors due to the attention to the design of this high-performance antenna. All radiating elements’ radiation patterns provide an excellent balance between omni-directionality, pattern diversity, and good radiation abilities at the desired elevation. This is an important criterion for the transportation and marine market, which the antenna was specifically designed for. Main applications are for commercial/industrial vehicles, marine, M2M, and other IoT systems using a wide range of radio technologies while remaining futureproof over the wide frequency band.
| SKU | COAX Cable Type | COAX Cable Length | Colour |
|---|---|---|---|
| A-MIMO-0004-V1-04-B | RTK-031 | 2m | Black |
| A-MIMO-0004-V1-04-W | RTK-031 | 2m | White |
| SKU | A-MIMO-0004-V1-04-B | A-MIMO-0004-V1-04-W |
|---|---|---|
| EAN | 6009710927694 | 6009710927670 |
| HS Code | 8529.10.69 (EU) 8517.71.0000 (USA) 8529.10.90 (SA & Global) |
8529.10.69 (EU) 8517.71.0000 (USA) 8529.10.90 (SA & Global) |
| Packaged Weight | 1.18kg 2.60lbs |
1.18kg 2.60lbs |
| Packaged Dimensions | 230 x 220 x 150 mm 9.05 x 8.66 x 5.9 inch |
230 x 220 x 150 mm 9.05 x 8.66 x 5.9 inch |
| Master Box QTY | 8 | 8 |
| Master Box Weight | 10.66kg 23.50lbs |
10.66kg 23.50lbs |
| Master Box Dimensions | 565 x 465 x 315 mm 22.24 x 18.31 x 12.40 inch |
565 x 465 x 315 mm 22.24 x 18.31 x 12.40 inch |
| Country of Origin | CN | CN |
MIMO-3-12
Wide Band (450-3800MHz), 2X2 MIMO LTE/5G (with or without GPS / GLONASS).
High Performance Omni-directional Antennas in a shark-fin, taller, design. Superior performance on lower bands (sub-1Ghz), meaning: superior reach & increased stability on harder to reach areas. Rugged, weather-proof and with Multiple Mounting Options.
I want to order
More Info
The MIMO-3-13 is a 3-in-1 high performance multi frequency antenna within a single housing, providing two cellular and a GPS/GLONASS antenna. The two cellular MIMO antennas (for 2G/3G/4G) covers the contemporary 617 MHz to 2700 MHz bands, as well as the new emerging LTE and 5G spectrum for 450MHz and 3.5GHz CBRS bands, which is becoming popular across the various international cellular network operators for LTE. The ultra-wideband performance of the antenna allows it to be used across different operators and technologies and is ready for future cellular technologies up to 3.8 GHz for 5G applications. The third antenna is a high-performance active GPS/GLONASS system operating down to -40°C. The MIMO-3-13 exceeds the performance of most competitors due to the attention to the design of this high-performance antenna. The radiation patterns of all radiating elements provide an excellent balance between omnidirectionality, pattern diversity and good radiation abilities at the desired elevation. This is an important criterion for the transportation and marine market, which the antenna was specifically designed for. Main applications are for commercial/industrial vehicles, marine, M2M and other IoT systems using a wide range of radio technologies, while remaining futureproof over the wide frequency band.
| SKU | COAX Cable Type | COAX Cable Length | Colour |
|---|---|---|---|
| A-MIMO-0003-V2-13 | HDF-195 & RTK-031 | 2m | White |
| SKU | A-MIMO-0003-V2-13 |
|---|---|
| EAN | 6009710923740 |
| HS Code | 8529.10.69 (EU) 8517.71.0000 (USA) 8529.10.90 (SA & Global) |
| Packaged Weight | 1.31kg 2.89lbs |
| Packaged Dimensions | 265 x 211 x 204 mm 10.43 x 8.31 x 8.03 inch |
| Master Box QTY | 10 |
| Master Box Weight | 16.6kg 36.6lbs |
| Master Box Dimensions | 1125 x 430 x 330mm 44.29 x 16.93 x 13 inch |
| Country of Origin | CN |
MIMO-4-4
Ultra Wideband (617-6000MHz), 4X4 MIMO LTE/5G. High Performance Omni-directional Antennas in our traditional PUCK design (slightly bigger).
The natural upgrade from our well stablished PUCK antennas. The bigger size allows more room for bigger antennas, hence improved performance and reach. Rugged, weather-proof and with Multiple Mounting Options.
I want to order
More Info
The MIMO-4-4 is a 4-in-1 high-performance, multi-frequency antenna with four cellular antennas within a single housing. The four cellular MIMO antennas offer wideband coverage from 617 to 6000 MHz, covering contemporary LTE/4G and 5G bands for future-proof implementation. The ultra-wideband performance of the cellular antennas allows it to be used across different operators and technologies and is ready for future cellular technologies up to 6 GHz for 5G applications. The MIMO-4-4 exceeds the performance of most competitors due to the attention to the design of this high-performance antenna. All radiating elements’ radiation patterns provide an excellent balance between omni-directionality, pattern diversity, and good radiation abilities at the desired elevation. This is an important criterion for the transportation and marine market, which the antenna was specifically designed for. Main applications are for commercial/industrial vehicles, marine, M2M, and other IoT systems using a wide range of radio technologies while remaining futureproof over the wide frequency band.
| SKU | COAX Cable Type | COAX Cable Length | Colour |
|---|---|---|---|
| A-MIMO-0004-V1-04-B | RTK-031 | 2m | Black |
| A-MIMO-0004-V1-04-W | RTK-031 | 2m | White |
| SKU | A-MIMO-0004-V1-04-B | A-MIMO-0004-V1-04-W |
|---|---|---|
| EAN | 6009710927694 | 6009710927670 |
| HS Code | 8529.10.69 (EU) 8517.71.0000 (USA) 8529.10.90 (SA & Global) |
8529.10.69 (EU) 8517.71.0000 (USA) 8529.10.90 (SA & Global) |
| Packaged Weight | 1.18kg 2.60lbs |
1.18kg 2.60lbs |
| Packaged Dimensions | 230 x 220 x 150 mm 9.05 x 8.66 x 5.9 inch |
230 x 220 x 150 mm 9.05 x 8.66 x 5.9 inch |
| Master Box QTY | 8 | 8 |
| Master Box Weight | 10.66kg 23.50lbs |
10.66kg 23.50lbs |
| Master Box Dimensions | 565 x 465 x 315 mm 22.24 x 18.31 x 12.40 inch |
565 x 465 x 315 mm 22.24 x 18.31 x 12.40 inch |
| Country of Origin | CN | CN |
PUCK-2
Ultra-Wide Band (617 – 4200MHz),2X2 MIMO LTE/5G. Smaller Aesthetic impact.
With its small Aesthetic impact, the PUCK is designed for closer-to-shore applications. Despite its size, it beats same sized competitors. Rugged, weather-proof and with Multiple Mounting Options.
I want to order
More Info
Poynting’s new PUCK range offers a small profile antenna for use in the IoT/M2M, Smart Meter, Smart Utilities, Transportation, Marine and the Agricultural/Farming markets. The PUCK-2 consists of a 2-in-1 antenna system within a single housing, featuring 2×2 MIMO LTE/5G antennas (for 2G/3G/4G) that cover the 617 to 4200 MHz band which includes the most popular international LTE/5G bands. The PUCK exceeds the performance of many competitors due to the attention to design of this high-performance antenna. The radiation patterns of all radiating elements provide an excellent balance between omnidirectionality, pattern diversity and good radiation abilities at the desired elevation which is often overlooked in such a small size antenna. Despite its small size, this antenna provides excellent performance especially at the higher frequency bands where performance is critical for LTE throughput and connection stability. This antenna is designed so that both the LTE ports are connected to the router/device to ensure the best performance. Please see other derivatives of the PUCK range that are more suitable for a SISO application.
| SKU | COAX Cable Type | COAX Cable Length | Colour |
|---|---|---|---|
| A-PUCK-0002-V1-01 | RTK-031 | 2m | Black |
| A-PUCK-0002-V1-01-W | RTK-031 | 2m | White |
| SKU | A-PUCK-0002-V1-01 | A-PUCK-0002-V1-01-W |
|---|---|---|
| EAN | 6009880915200 | 6009710920572 |
| HS Code | 8529.10.69 (EU) 8517.71.0000 (USA) 8529.10.90 (SA & Global) |
8529.10.69 (EU) 8517.71.0000 (USA) 8529.10.90 (SA & Global) |
| Packaged Weight | 0.507kg 1.12lbs |
0.507kg 1.12lbs |
| Packaged Dimensions | 150 x 150 x 120 mm 5.91 x 5.91 x 4.73 inch |
150 x 150 x 120 mm 5.91 x 5.91 x 4.73 inch |
| Master Box QTY | 27 | 27 |
| Master Box Weight | 16.7kg 36.82lbs |
16.7kg 36.82lbs |
| Master Box Dimensions | 520 x 495 x 400 mm 20.47 x 19.49 x 15.75 inch |
520 x 495 x 400 mm 20.47 x 19.49 x 15.75 inch |
| Country of Origin | CN | CN |
MIMO-3-12
Wide Band (450-3800MHz), 2X2 MIMO LTE/5G (with or without GPS / GLONASS).
High Performance Omni-directional Antennas in a shark-fin, taller, design. Superior performance on lower bands (sub-1Ghz), meaning: superior reach & increased stability on harder to reach areas. Rugged, weather-proof and with Multiple Mounting Options.
I want to order
More Info
The MIMO-3-13 is a 3-in-1 high performance multi frequency antenna within a single housing, providing two cellular and a GPS/GLONASS antenna. The two cellular MIMO antennas (for 2G/3G/4G) covers the contemporary 617 MHz to 2700 MHz bands, as well as the new emerging LTE and 5G spectrum for 450MHz and 3.5GHz CBRS bands, which is becoming popular across the various international cellular network operators for LTE. The ultra-wideband performance of the antenna allows it to be used across different operators and technologies and is ready for future cellular technologies up to 3.8 GHz for 5G applications. The third antenna is a high-performance active GPS/GLONASS system operating down to -40°C. The MIMO-3-13 exceeds the performance of most competitors due to the attention to the design of this high-performance antenna. The radiation patterns of all radiating elements provide an excellent balance between omnidirectionality, pattern diversity and good radiation abilities at the desired elevation. This is an important criterion for the transportation and marine market, which the antenna was specifically designed for. Main applications are for commercial/industrial vehicles, marine, M2M and other IoT systems using a wide range of radio technologies, while remaining futureproof over the wide frequency band.
| SKU | COAX Cable Type | COAX Cable Length | Colour |
|---|---|---|---|
| A-MIMO-0003-V2-13 | HDF-195 & RTK-031 | 2m | White |
| SKU | A-MIMO-0003-V2-13 |
|---|---|
| EAN | 6009710923740 |
| HS Code | 8529.10.69 (EU) 8517.71.0000 (USA) 8529.10.90 (SA & Global) |
| Packaged Weight | 1.31kg 2.89lbs |
| Packaged Dimensions | 265 x 211 x 204 mm 10.43 x 8.31 x 8.03 inch |
| Master Box QTY | 10 |
| Master Box Weight | 16.6kg 36.6lbs |
| Master Box Dimensions | 1125 x 430 x 330mm 44.29 x 16.93 x 13 inch |
| Country of Origin | CN |
OMNI-280
Wide Band (617-3800MHz), SISO LTE/5G Antenna, 1m RG-58 – SMA (m) – Mounting.
The OMNI-280 is a small stick-shaped antenna, which packs a great performance in a small form factor. Give its design, it ensures top-performance regardless of the surface where it is installed.
I want to order
More Info
The OMNI-280 antenna provides an innovative solution for the signal enhancement of 4G/3G and 2G networks. It is a unique magnetic, wall- or pole-mountable, single polarised, full LTE band antenna that incorporates an ultra-wideband element in a single housing. This antenna is a cost-effective solution for enhancing signal reception and throughput. The OMNI-280 antenna increases signal reliability, ensures higher data throughput for users and provides a stable, high quality connection. This improves user experience and secures client retention. It is ideal for any application using the GSM network (LTE/HSPA/3G/EDGE/ GPRS).
| SKU | COAX Cable Type | COAX Cable Length | Colour | Other |
|---|---|---|---|---|
| A-OMNI-0280-01-V1 | RG-58 | 1m | Off White | |
| A-OMNI-0280-02-V1 | RG-58 | 2m | Off White | |
| A-OMNI-0280-08-V1 | RG-58 | 2m | Off White |
| SKU | A-OMNI-0280-01-V1 | A-OMNI-0280-02-V1 | A-OMNI-0280-08-V1 |
|---|---|---|---|
| EAN | 6009710923924 | 6009710923948 | 6009710923962 |
| HS Code | 8529.10.69 (EU) 8517.71.0000 (USA) 8529.10.90 (SA & Global) |
8529.10.69 (EU) 8517.71.0000 (USA) 8529.10.90 (SA & Global) |
8529.10.69 (EU) 8517.71.0000 (USA) 8529.10.90 (SA & Global) |
| Packaged Weight | 0.158kg 0.35lbs |
0.180kg 0.4lbs |
0.182kg 0.401lbs |
| Packaged Dimensions | 250 x 150 x 50 mm 9.84 x 5.91 x 1.97 inch |
250 x 150 x 50 mm 9.84 x 5.91 x 1.97 inch |
250 x 150 x 50 mm 9.84 x 5.91 x 1.97 inch |
| Master Box QTY | 50 | 50 | 50 |
| Master Box Weight | 7.93kg 17.48lbs |
9.36kg 20.64lbs |
9.410kg 20.75lbs |
| Master Box Dimensions | 500 x 330 x 320 mm 19.69 x 13 x 12.6 inch |
500 x 330 x 320 mm 19.69 x 13 x 12.6 inch |
500 x 330 x 320 mm 19.69 x 13 x 12.6 inch |
| Country of Origin | CN | CN | CN |
PUCK-1
Ultra-Wide Band (617 – 4200MHz), LTE/5G SISO Antenna, Smaller Aesthetic impact.
With its small Aesthetic impact, the PUCK is designed for closer-to-shore applications. Despite its size, it beats same sized competitors.
Rugged, weather-proof and with Multiple Mounting Options.
I want to order
More Info
Poynting’s new PUCK range offers a small profile antenna for use in the IoT/M2M, smart meter, smart utilities, transportation, marine and the agricultural/farming markets. The PUCK-1 is a SISO antenna, covering the 617 to 4200 MHz band, which includes the most popular international LTE/5G bands. The PUCK exceeds the performance of many competitors due to the attention to design of this high-performance antenna. The radiation patterns of all radiating elements provide an excellent balance between omnidirectionality, pattern diversity and good radiation abilities at the desired elevation, which is often overlooked in such a small size antenna. Despite its small size, this antenna provides excellent performance especially at the higher frequency bands, where performance is critical for LTE/5G throughput and connection stability.
| SKU | COAX Cable Type | COAX Cable Length | Colour |
|---|---|---|---|
| A-PUCK-0001-V1-01 | RTK-031 | 2m | Black |
| A-PUCK-0001-V1-01-W | RTK-031 | 2m | White |
| SKU | A-PUCK-0001-V1-01 | A-PUCK-0001-V1-01-W |
|---|---|---|
| EAN | 6009880915262 | 6009710920435 |
| HS Code | 8529.10.69 (EU) 8517.71.0000 (USA) 8529.10.90 (SA & Global) |
8529.10.69 (EU) 8517.71.0000 (USA) 8529.10.90 (SA & Global) |
| Packaged Weight | 0.443kg 0.98lbs |
0.443kg 0.98lbs |
| Packaged Dimensions | 150 x 150 x 120 mm 5.91 x 5.91 x 4.73 inch |
150 x 150 x 120 mm 5.91 x 5.91 x 4.73 inch |
| Master Box QTY | 27 | 27 |
| Master Box Weight | 14.95kg 32.96lbs |
14.95kg 32.96lbs |
| Master Box Dimensions | 520 x 495 x 400 mm 20.47 x 19.49 x 15.75 inch |
520 x 495 x 400 mm 20.47 x 19.49 x 15.75 inch |
| Country of Origin | CN | CN |
XPOL-1-v2-41
A 4×4 MIMO, cross-polarized, Ultra-Wide Band (690 – 3800 MHz), Omni-directional (3dBi) Antenna, w/ 5m twin HDF-195 cables, with SMA (m) connectors options.
This makes the antenna perfect for most application areas, such as urban, rural, agricultural and commercial, to achieve the best possible coverage over a large area.
I want to order
More Info
The XPOL-1-5G is Poynting’s second generation “V2” of this very popular Cross Polarised (XPOL), cellular band, 2×2 MIMO antenna. The addition of a 4X4 MIMO derivative is also available for user specific needs. The antenna has been completely redesigned form the previous generation with an all new enclosure and antenna design. The antenna now includes the newer 3400 – 3800 MHz bands as well as the in demand lower 690 MHz band, which were not previously covered by our V1 and is suitable for 2G, 3G, 4G & 5G. This antenna performs exceptionally well in the following frequency bands: 690 – 960 MHz, 1700 – 2170 MHz, 2300 – 2700 MHz & 3400 – 3800 MHz, with a peak gain of 4 dBi across the frequency bands of operation. The radiation patterns of this antenna are omni-directional and exceptionally well controlled, further adding to the performance of the antenna. This makes the antenna perfect for most application areas, such as urban, rural, agricultural and commercial, to achieve the best possible coverage over a large area. The robust mechanical enclosure design makes the antenna weather, dust and vandal resistant and gives it an IP65 rating, suitable for harsh environments.
| SKU | COAX Cable Type | COAX Cable Length | Colour | Other |
|---|---|---|---|---|
| A-XPOL-0001-V2-21 | HDF-195 | 5m | White | |
| A-XPOL-0001-V2-41 | HDF-195 | 5m | White |
| SKU | A-XPOL-0001-V2-21 | A-XPOL-0001-V2-41 |
|---|---|---|
| EAN | 6009710920763 | 6009710920886 |
| HS Code | 8529.10.69 (EU) 8517.71.0000 (USA) 8529.10.90 (SA & Global) |
8529.10.69 (EU) 8517.71.0000 (USA) 8529.10.90 (SA & Global) |
| Packaged Weight | 1.05kg 2.31lbs |
1.34kg 2.95lbs |
| Packaged Dimensions | 270 x 190 x 100 mm 10.63 x 7.48 x 3.94 inch |
270 x 190 x 100 mm 10.63 x 7.48 x 3.94 inch |
| Master Box QTY | 20 | 20 |
| Master Box Weight | 19.5kg 43lbs |
27.62kg 60.89lbs |
| Master Box Dimensions | 550 x 390 x 500mm 21.65 x 15.35 x 19.68 inch |
550 x 390 x 500mm 21.65 x 15.35 x 19.68 inch |
| Country of Origin | CN | CN |
OMNI-214
A 4×4 MIMO Ultra-Wide Band (617-3800 MHz) Omni-directional (3.5dBi) Antenna, w/ 2m twin HDF-195 cables, with SMA (m) connectors.
The ultra-wideband performance makes the antenna future proof, as it covers LTE Band 71 (617 to 698 MHz) as well as the CBRS bands from 3400 to 3800 MHz for inland use. The antenna comes with an IP65 protection rating against dust and water ingress, making it ideal for urban and commercial deployments.
I want to order
More Info
The OMNI-214 is an ultra-wideband antenna, which covers all contemporary LTE/5G frequency bands with excellent balanced gain across all frequencies from 617 to 3800 MHz. The antenna offers 4×4 MIMO capability from its vertically separated radiating elements, all in the same single radome. The antenna design allows for superior pattern control over the entire frequency range, making the OMNI-214 a true omni-directional 4×4 MIMO antenna, suitable for urban or commercial applications. The OMNI-214 guarantees signal reception almost everywhere and is usable in all part of the world. The ultra-wideband performance makes the antenna future proof, as it covers LTE Band 71 (617 to 698 MHz) as well as the CBRS bands from 3400 to 3800 MHz for inland use. The antenna comes with an IP65 protection rating against dust and water ingress, making it ideal for urban and commercial deployments.
| SKU | COAX Cable Type | COAX Cable Length | Colour | Other |
|---|---|---|---|---|
| A-OMNI-0214-V1-01 | HDF-195 | 2m | White |
| SKU | A-OMNI-0214-V1-01 |
|---|---|
| EAN | 6009710923665 |
| HS Code | 8529.10.69 (EU) 8517.71.0000 (USA) 8529.10.90 (SA & Global) |
| Packaged Weight | 1.59kg 3.51lbs |
| Packaged Dimensions | 690 x 95 x 96 mm 27.17 x 3.74 x 3.78 inch |
| Master Box QTY | 24 |
| Master Box Weight | 39.47kg 87.02lbs |
| Master Box Dimensions | 400 x 600 x 810 mm 15.75 x 23.62 x 31.89 inch |
| Country of Origin | CN |
MIMO-4-4
Ultra Wideband (617-6000MHz), 4X4 MIMO LTE/5G. High Performance Omni-directional Antennas in our traditional PUCK design (slightly bigger).
The natural upgrade from our well stablished PUCK antennas, now in a 4×4 LTE/5G configuration. Beats same sized competitors. Slightly inferior performance on very-hard to reach locations (remote/rural), compared to the MIMO-3 Series.
I want to order
More Info
The MIMO-4-4 is a 4-in-1 high-performance, multi-frequency antenna with four cellular antennas within a single housing. The four cellular MIMO antennas offer wideband coverage from 617 to 6000 MHz, covering contemporary LTE/4G and 5G bands for future-proof implementation. The ultra-wideband performance of the cellular antennas allows it to be used across different operators and technologies and is ready for future cellular technologies up to 6 GHz for 5G applications. The MIMO-4-4 exceeds the performance of most competitors due to the attention to the design of this high-performance antenna. All radiating elements’ radiation patterns provide an excellent balance between omni-directionality, pattern diversity, and good radiation abilities at the desired elevation. This is an important criterion for the transportation and marine market, which the antenna was specifically designed for. Main applications are for commercial/industrial vehicles, marine, M2M, and other IoT systems using a wide range of radio technologies while remaining futureproof over the wide frequency band.
| SKU | COAX Cable Type | COAX Cable Length | Colour |
|---|---|---|---|
| A-MIMO-0004-V1-04-B | RTK-031 | 2m | Black |
| A-MIMO-0004-V1-04-W | RTK-031 | 2m | White |
| SKU | A-MIMO-0004-V1-04-B | A-MIMO-0004-V1-04-W |
|---|---|---|
| EAN | 6009710927694 | 6009710927670 |
| HS Code | 8529.10.69 (EU) 8517.71.0000 (USA) 8529.10.90 (SA & Global) |
8529.10.69 (EU) 8517.71.0000 (USA) 8529.10.90 (SA & Global) |
| Packaged Weight | 1.18kg 2.60lbs |
1.18kg 2.60lbs |
| Packaged Dimensions | 230 x 220 x 150 mm 9.05 x 8.66 x 5.9 inch |
230 x 220 x 150 mm 9.05 x 8.66 x 5.9 inch |
| Master Box QTY | 8 | 8 |
| Master Box Weight | 10.66kg 23.50lbs |
10.66kg 23.50lbs |
| Master Box Dimensions | 565 x 465 x 315 mm 22.24 x 18.31 x 12.40 inch |
565 x 465 x 315 mm 22.24 x 18.31 x 12.40 inch |
| Country of Origin | CN | CN |
OMNI-293
Ultra-Wide Band (617 – 3800 MHz), Omni-Directional (9dBi) Antenna, N-Type connector.
The antenna is future proof as it covers the up and coming 617 to 698 MHz band, as well as 3400 to 3800 MHz which will be utilized for future 5G applications. The antenna comes with an N-Type female connector at its base, which can be connected to a cable of the desired type and length.
I want to order
More Info
The OMNI-293 is an ultra-wideband, high performance, omni-directional antenna that covers the contemporary 4G/LTE and future 5G operating frequencies with excellent balanced gain across all frequencies. The ultra-wideband performance from the antenna allows it to operate from 617 to 3800 MHz, with a peak gain of 9 dBi. This makes the antenna usable in all parts of the world and guarantees signal reception almost everywhere. The antenna design allows for superior pattern control over the entire frequency range, making the OMNI-293 a true high performance omni-directional antenna, suitable for urban and rural applications. Poynting antennas achieves this performance through new antenna design, where multiple dipoles and a unique (patented) feed network is implemented. The antenna is future proof as it covers the up and coming 617 to 698 MHz band, as well as 3400 to 3800 MHz which will be utilized for future 5G applications. The antenna comes with an N-Type female connector at its base, which can be connected to a cable of the desired type and length.
| SKU | COAX Cable Type | COAX Cable Length | Colour | Other |
|---|---|---|---|---|
| A-OMNI-0293-V1-01 | N/A | N/A | Off White |
| SKU | A-OMNI-0293-V1-01 |
|---|---|
| EAN | 6009710922347 |
| HS Code | 8529.10.69 (EU) 8517.71.0000 (USA) 8529.10.90 (SA & Global) |
| Packaged Weight | 1.14kg 2.51lbs |
| Packaged Dimensions | 690 x 95 x 95 mm 27.17 x 3.74 x 3.74 inch |
| Master Box QTY | 24 |
| Master Box Weight | 29.04kg 64.02lbs |
| Master Box Dimensions | 810 x 600 x 400 mm 31.89 x 23.62 x 15.75 inch |
| Country of Origin | CN |
OMNI-600
A 2×2 MIMO Ultra-Wide Band (410-3800 MHz) Omni-directional (6.2dBi) Antenna, w/ 5m twin HDF-195 cables, with SMA (m) connectors.
The OMNI-600 guarantees signal reception almost everywhere, making it usable in all parts of the world. Poynting Antennas achieves this through new antenna configuration using multiple dipoles and a unique (patented) feed network.
I want to order
More Info
The OMNI-600 is a unique new design with improved 2×2 MIMO electrical performance. The ultra-wide band covers all contemporary operating frequencies with excellent balanced gain across all frequencies. Higher frequencies are not compromised, and the antenna design allows Poynting to have superior pattern control over the entire frequency range, making the OMNI-600 a true high performance omni-directional antenna. The OMNI-600 guarantees signal reception almost everywhere, making it usable in all parts of the world. Poynting Antennas achieves this through new antenna configuration using multiple dipoles and a unique (patented) feed network. The antenna is future proof as it covers the 450 MHz frequency and 3.5 GHz CBRS band which is gaining popularity in various regions and countries.
- 2X2 MIMO high performance omni-directional antenna
- Consistent gain over a wide frequency band
- Increased connectivity stability
- Excellent broadband quality antenna
- Vandal and water-resistant enclosure
XPOL-1-v2-21
A 2×2 MIMO, cross-polarized, Ultra-Wide Band (690 – 3800 MHz), Omni-directional (3dBi) Antenna, w/ 5m twin HDF-195 cables, with SMA (m) connectors options.
This makes the antenna perfect for most application areas, such as urban, rural, agricultural and commercial, to achieve the best possible coverage over a large area.
I want to order
More Info
The XPOL-1-5G is Poynting’s second generation “V2” of this very popular Cross Polarised (XPOL), cellular band, 2×2 MIMO antenna. The addition of a 4X4 MIMO derivative is also available for user specific needs. The antenna has been completely redesigned form the previous generation with an all new enclosure and antenna design. The antenna now includes the newer 3400 – 3800 MHz bands as well as the in demand lower 690 MHz band, which were not previously covered by our V1 and is suitable for 2G, 3G, 4G & 5G. This antenna performs exceptionally well in the following frequency bands: 690 – 960 MHz, 1700 – 2170 MHz, 2300 – 2700 MHz & 3400 – 3800 MHz, with a peak gain of 4 dBi across the frequency bands of operation. The radiation patterns of this antenna are omni-directional and exceptionally well controlled, further adding to the performance of the antenna. This makes the antenna perfect for most application areas, such as urban, rural, agricultural and commercial, to achieve the best possible coverage over a large area. The robust mechanical enclosure design makes the antenna weather, dust and vandal resistant and gives it an IP65 rating, suitable for harsh environments.
| SKU | COAX Cable Type | COAX Cable Length | Colour | Other |
|---|---|---|---|---|
| A-XPOL-0001-V2-21 | HDF-195 | 5m | White | |
| A-XPOL-0001-V2-41 | HDF-195 | 5m | White |
| SKU | A-XPOL-0001-V2-21 | A-XPOL-0001-V2-41 |
|---|---|---|
| EAN | 6009710920763 | 6009710920886 |
| HS Code | 8529.10.69 (EU) 8517.71.0000 (USA) 8529.10.90 (SA & Global) |
8529.10.69 (EU) 8517.71.0000 (USA) 8529.10.90 (SA & Global) |
| Packaged Weight | 1.05kg 2.31lbs |
1.34kg 2.95lbs |
| Packaged Dimensions | 270 x 190 x 100 mm 10.63 x 7.48 x 3.94 inch |
270 x 190 x 100 mm 10.63 x 7.48 x 3.94 inch |
| Master Box QTY | 20 | 20 |
| Master Box Weight | 19.5kg 43lbs |
27.62kg 60.89lbs |
| Master Box Dimensions | 550 x 390 x 500mm 21.65 x 15.35 x 19.68 inch |
550 x 390 x 500mm 21.65 x 15.35 x 19.68 inch |
| Country of Origin | CN | CN |
OMNI-293
Ultra-Wide Band (617 – 3800 MHz), Omni-Directional (9dBi) Antenna, N-Type connector.
The antenna is future proof as it covers the up and coming 617 to 698 MHz band, as well as 3400 to 3800 MHz which will be utilized for future 5G applications. The antenna comes with an N-Type female connector at its base, which can be connected to a cable of the desired type and length.
I want to order
More Info
The OMNI-293 is an ultra-wideband, high performance, omni-directional antenna that covers the contemporary 4G/LTE and future 5G operating frequencies with excellent balanced gain across all frequencies. The ultra-wideband performance from the antenna allows it to operate from 617 to 3800 MHz, with a peak gain of 9 dBi. This makes the antenna usable in all parts of the world and guarantees signal reception almost everywhere. The antenna design allows for superior pattern control over the entire frequency range, making the OMNI-293 a true high performance omni-directional antenna, suitable for urban and rural applications. Poynting antennas achieves this performance through new antenna design, where multiple dipoles and a unique (patented) feed network is implemented. The antenna is future proof as it covers the up and coming 617 to 698 MHz band, as well as 3400 to 3800 MHz which will be utilized for future 5G applications. The antenna comes with an N-Type female connector at its base, which can be connected to a cable of the desired type and length.
| SKU | COAX Cable Type | COAX Cable Length | Colour | Other |
|---|---|---|---|---|
| A-OMNI-0293-V1-01 | N/A | N/A | Off White |
| SKU | A-OMNI-0293-V1-01 |
|---|---|
| EAN | 6009710922347 |
| HS Code | 8529.10.69 (EU) 8517.71.0000 (USA) 8529.10.90 (SA & Global) |
| Packaged Weight | 1.14kg 2.51lbs |
| Packaged Dimensions | 690 x 95 x 95 mm 27.17 x 3.74 x 3.74 inch |
| Master Box QTY | 24 |
| Master Box Weight | 29.04kg 64.02lbs |
| Master Box Dimensions | 810 x 600 x 400 mm 31.89 x 23.62 x 15.75 inch |
| Country of Origin | CN |
OMNI-121
Wide Band LTE Omnidirectional Antenna, 698 – 2700MHz, max. Gain: 6 dBi, with stainless steel pole mount bracket, IP65.
The antenna is a popular choice with installers because of its versatile base station capabilities. It is also ideal for machine to machine (M2M) applications that are communicating through GSM network (GPRS/ EDGE/ 3G/ HSPA/ LTE).
I want to order
More Info
This medium gain omni-directional antenna covers the GSM 900, GSM1800 / UMTS and LTE frequency bands. It is a light-weight antenna that is easy to install. This is a cost- effective omni-directional solution as it comes with a 5m cable. The antenna is a popular choice with installers because of its versatile base station capabilities. It is also ideal for machine to machine (M2M) applications that are communicating through GSM network (GPRS/ EDGE/ 3G/ HSPA/ LTE).
| SKU | COAX Cable Type | COAX Cable Length | Colour | Other |
|---|---|---|---|---|
| A-OMNI-0121-V3 | HDF-195 | 8m | Off White | |
| A-OMNI-0121-01-V3 | HDF-195 | 5m | Off White | |
| A-OMNI-0121-03-V3 | HDF-195 | 5m | Off White |
| SKU | A-OMNI-0121-V3 | A-OMNI-0121-01-V3 | A-OMNI-0121-03-V3 |
|---|---|---|---|
| EAN | 6009710923887 | 6009710923900 | 6009710922507 |
| HS Code | 8529.10.69 (EU) 8517.71.0000 (USA) 8529.10.90 (SA & Global) |
8529.10.69 (EU) 8517.71.0000 (USA) 8529.10.90 (SA & Global) |
8529.10.69 (EU) 8517.71.0000 (USA) 8529.10.90 (SA & Global) |
| Packaged Weight | 0.72kg 1.59lbs |
0.6kg 1.32lbs |
0.63kg 1.39lbs |
| Packaged Dimensions | 595 x 130 x 65 mm 23.43 x 5.12 x 2.56 inch |
595 x 130 x 65 mm 23.43 x 5.12 x 2.56 inch |
595 x 130 x 65 mm 23.43 x 5.12 x 2.56 inch |
| Master Box QTY | 20 | 20 | 20 |
| Master Box Weight | 14.8kg 32.63lbs |
14.4kg 31.75lbs |
14.4kg 31.75lbs |
| Master Box Dimensions | 610 x 545 x 352 mm 24.02 x 21.46 x 13.86 inch |
610 x 545 x 352 mm 24.02 x 21.46 x 13.86 inch |
610 x 545 x 352 mm 24.02 x 21.46 x 13.86 inch |
| Country of Origin | CN | CN | CN |
OMNI-280
Wide Band (617-3800MHz), SISO LTE/5G Antenna, 1m RG-58 – SMA (m) – Mounting.
The OMNI-280 is a small stick-shaped antenna, which packs a great performance in a small form factor. Give its design, it ensures top-performance regardless of the surface where it is installed.
I want to order
More Info
The OMNI-280 antenna provides an innovative solution for the signal enhancement of 4G/3G and 2G networks. It is a unique magnetic, wall- or pole-mountable, single polarised, full LTE band antenna that incorporates an ultra-wideband element in a single housing. This antenna is a cost-effective solution for enhancing signal reception and throughput. The OMNI-280 antenna increases signal reliability, ensures higher data throughput for users and provides a stable, high quality connection. This improves user experience and secures client retention. It is ideal for any application using the GSM network (LTE/HSPA/3G/EDGE/ GPRS).
| SKU | COAX Cable Type | COAX Cable Length | Colour | Other |
|---|---|---|---|---|
| A-OMNI-0280-01-V1 | RG-58 | 1m | Off White | |
| A-OMNI-0280-02-V1 | RG-58 | 2m | Off White | |
| A-OMNI-0280-08-V1 | RG-58 | 2m | Off White |
| SKU | A-OMNI-0280-01-V1 | A-OMNI-0280-02-V1 | A-OMNI-0280-08-V1 |
|---|---|---|---|
| EAN | 6009710923924 | 6009710923948 | 6009710923962 |
| HS Code | 8529.10.69 (EU) 8517.71.0000 (USA) 8529.10.90 (SA & Global) |
8529.10.69 (EU) 8517.71.0000 (USA) 8529.10.90 (SA & Global) |
8529.10.69 (EU) 8517.71.0000 (USA) 8529.10.90 (SA & Global) |
| Packaged Weight | 0.158kg 0.35lbs |
0.180kg 0.4lbs |
0.182kg 0.401lbs |
| Packaged Dimensions | 250 x 150 x 50 mm 9.84 x 5.91 x 1.97 inch |
250 x 150 x 50 mm 9.84 x 5.91 x 1.97 inch |
250 x 150 x 50 mm 9.84 x 5.91 x 1.97 inch |
| Master Box QTY | 50 | 50 | 50 |
| Master Box Weight | 7.93kg 17.48lbs |
9.36kg 20.64lbs |
9.410kg 20.75lbs |
| Master Box Dimensions | 500 x 330 x 320 mm 19.69 x 13 x 12.6 inch |
500 x 330 x 320 mm 19.69 x 13 x 12.6 inch |
500 x 330 x 320 mm 19.69 x 13 x 12.6 inch |
| Country of Origin | CN | CN | CN |
MIMO-4-4
Ultra Wideband (617-6000MHz), 4X4 MIMO LTE/5G. High Performance Omni-directional Antennas in our traditional PUCK design (slightly bigger).
The natural upgrade from our well stablished PUCK antennas. The bigger size allows more room for bigger antennas, hence improved performance and reach. Rugged, weather-proof and with Multiple Mounting Options.
I want to order
More Info
The MIMO-4-4 is a 4-in-1 high-performance, multi-frequency antenna with four cellular antennas within a single housing. The four cellular MIMO antennas offer wideband coverage from 617 to 6000 MHz, covering contemporary LTE/4G and 5G bands for future-proof implementation. The ultra-wideband performance of the cellular antennas allows it to be used across different operators and technologies and is ready for future cellular technologies up to 6 GHz for 5G applications. The MIMO-4-4 exceeds the performance of most competitors due to the attention to the design of this high-performance antenna. All radiating elements’ radiation patterns provide an excellent balance between omni-directionality, pattern diversity, and good radiation abilities at the desired elevation. This is an important criterion for the transportation and marine market, which the antenna was specifically designed for. Main applications are for commercial/industrial vehicles, marine, M2M, and other IoT systems using a wide range of radio technologies while remaining futureproof over the wide frequency band.
| SKU | COAX Cable Type | COAX Cable Length | Colour |
|---|---|---|---|
| A-MIMO-0004-V1-04-B | RTK-031 | 2m | Black |
| A-MIMO-0004-V1-04-W | RTK-031 | 2m | White |
| SKU | A-MIMO-0004-V1-04-B | A-MIMO-0004-V1-04-W |
|---|---|---|
| EAN | 6009710927694 | 6009710927670 |
| HS Code | 8529.10.69 (EU) 8517.71.0000 (USA) 8529.10.90 (SA & Global) |
8529.10.69 (EU) 8517.71.0000 (USA) 8529.10.90 (SA & Global) |
| Packaged Weight | 1.18kg 2.60lbs |
1.18kg 2.60lbs |
| Packaged Dimensions | 230 x 220 x 150 mm 9.05 x 8.66 x 5.9 inch |
230 x 220 x 150 mm 9.05 x 8.66 x 5.9 inch |
| Master Box QTY | 8 | 8 |
| Master Box Weight | 10.66kg 23.50lbs |
10.66kg 23.50lbs |
| Master Box Dimensions | 565 x 465 x 315 mm 22.24 x 18.31 x 12.40 inch |
565 x 465 x 315 mm 22.24 x 18.31 x 12.40 inch |
| Country of Origin | CN | CN |
MIMO-3-12/13
Wide Band (450-3800MHz), 2X2 MIMO LTE/5G (with or without GPS / GLONASS).
High Performance Omni-directional Antennas in a shark-fin, taller, design. Superior performance on lower bands (sub-1Ghz), meaning: superior reach & increased stability on harder to reach areas. Rugged, weather-proof and with Multiple Mounting Options.
I want to order
More Info
The MIMO-3-13 is a 3-in-1 high performance multi frequency antenna within a single housing, providing two cellular and a GPS/GLONASS antenna. The two cellular MIMO antennas (for 2G/3G/4G) covers the contemporary 617 MHz to 2700 MHz bands, as well as the new emerging LTE and 5G spectrum for 450MHz and 3.5GHz CBRS bands, which is becoming popular across the various international cellular network operators for LTE. The ultra-wideband performance of the antenna allows it to be used across different operators and technologies and is ready for future cellular technologies up to 3.8 GHz for 5G applications. The third antenna is a high-performance active GPS/GLONASS system operating down to -40°C. The MIMO-3-13 exceeds the performance of most competitors due to the attention to the design of this high-performance antenna. The radiation patterns of all radiating elements provide an excellent balance between omnidirectionality, pattern diversity and good radiation abilities at the desired elevation. This is an important criterion for the transportation and marine market, which the antenna was specifically designed for. Main applications are for commercial/industrial vehicles, marine, M2M and other IoT systems using a wide range of radio technologies, while remaining futureproof over the wide frequency band.
| SKU | COAX Cable Type | COAX Cable Length | Colour |
|---|---|---|---|
| A-MIMO-0003-V2-13 | HDF-195 & RTK-031 | 2m | White |
| SKU | A-MIMO-0003-V2-13 |
|---|---|
| EAN | 6009710923740 |
| HS Code | 8529.10.69 (EU) 8517.71.0000 (USA) 8529.10.90 (SA & Global) |
| Packaged Weight | 1.31kg 2.89lbs |
| Packaged Dimensions | 265 x 211 x 204 mm 10.43 x 8.31 x 8.03 inch |
| Master Box QTY | 10 |
| Master Box Weight | 16.6kg 36.6lbs |
| Master Box Dimensions | 1125 x 430 x 330mm 44.29 x 16.93 x 13 inch |
| Country of Origin | CN |
MIMO-4-4
Ultra Wideband (617-6000MHz), 4X4 MIMO LTE/5G. High Performance Omni-directional Antennas in our traditional PUCK design (slightly bigger).
The natural upgrade from our well stablished PUCK antennas. The bigger size allows more room for bigger antennas, hence improved performance and reach. Rugged, weather-proof and with Multiple Mounting Options.
I want to order
More Info
The MIMO-4-4 is a 4-in-1 high-performance, multi-frequency antenna with four cellular antennas within a single housing. The four cellular MIMO antennas offer wideband coverage from 617 to 6000 MHz, covering contemporary LTE/4G and 5G bands for future-proof implementation. The ultra-wideband performance of the cellular antennas allows it to be used across different operators and technologies and is ready for future cellular technologies up to 6 GHz for 5G applications. The MIMO-4-4 exceeds the performance of most competitors due to the attention to the design of this high-performance antenna. All radiating elements’ radiation patterns provide an excellent balance between omni-directionality, pattern diversity, and good radiation abilities at the desired elevation. This is an important criterion for the transportation and marine market, which the antenna was specifically designed for. Main applications are for commercial/industrial vehicles, marine, M2M, and other IoT systems using a wide range of radio technologies while remaining futureproof over the wide frequency band.
| SKU | COAX Cable Type | COAX Cable Length | Colour |
|---|---|---|---|
| A-MIMO-0004-V1-04-B | RTK-031 | 2m | Black |
| A-MIMO-0004-V1-04-W | RTK-031 | 2m | White |
| SKU | A-MIMO-0004-V1-04-B | A-MIMO-0004-V1-04-W |
|---|---|---|
| EAN | 6009710927694 | 6009710927670 |
| HS Code | 8529.10.69 (EU) 8517.71.0000 (USA) 8529.10.90 (SA & Global) |
8529.10.69 (EU) 8517.71.0000 (USA) 8529.10.90 (SA & Global) |
| Packaged Weight | 1.18kg 2.60lbs |
1.18kg 2.60lbs |
| Packaged Dimensions | 230 x 220 x 150 mm 9.05 x 8.66 x 5.9 inch |
230 x 220 x 150 mm 9.05 x 8.66 x 5.9 inch |
| Master Box QTY | 8 | 8 |
| Master Box Weight | 10.66kg 23.50lbs |
10.66kg 23.50lbs |
| Master Box Dimensions | 565 x 465 x 315 mm 22.24 x 18.31 x 12.40 inch |
565 x 465 x 315 mm 22.24 x 18.31 x 12.40 inch |
| Country of Origin | CN | CN |
PUCK-2
Ultra-Wide Band (617 – 4200MHz),2X2 MIMO LTE/5G. Smaller Aesthetic impact.
With its small Aesthetic impact, the PUCK is designed for closer-to-shore applications. Despite its size, it beats same sized competitors. Rugged, weather-proof and with Multiple Mounting Options.
I want to order
More Info
Poynting’s new PUCK range offers a small profile antenna for use in the IoT/M2M, Smart Meter, Smart Utilities, Transportation, Marine and the Agricultural/Farming markets. The PUCK-2 consists of a 2-in-1 antenna system within a single housing, featuring 2×2 MIMO LTE/5G antennas (for 2G/3G/4G) that cover the 617 to 4200 MHz band which includes the most popular international LTE/5G bands. The PUCK exceeds the performance of many competitors due to the attention to design of this high-performance antenna. The radiation patterns of all radiating elements provide an excellent balance between omnidirectionality, pattern diversity and good radiation abilities at the desired elevation which is often overlooked in such a small size antenna. Despite its small size, this antenna provides excellent performance especially at the higher frequency bands where performance is critical for LTE throughput and connection stability. This antenna is designed so that both the LTE ports are connected to the router/device to ensure the best performance. Please see other derivatives of the PUCK range that are more suitable for a SISO application.
| SKU | COAX Cable Type | COAX Cable Length | Colour |
|---|---|---|---|
| A-PUCK-0002-V1-01 | RTK-031 | 2m | Black |
| A-PUCK-0002-V1-01-W | RTK-031 | 2m | White |
| SKU | A-PUCK-0002-V1-01 | A-PUCK-0002-V1-01-W |
|---|---|---|
| EAN | 6009880915200 | 6009710920572 |
| HS Code | 8529.10.69 (EU) 8517.71.0000 (USA) 8529.10.90 (SA & Global) |
8529.10.69 (EU) 8517.71.0000 (USA) 8529.10.90 (SA & Global) |
| Packaged Weight | 0.507kg 1.12lbs |
0.507kg 1.12lbs |
| Packaged Dimensions | 150 x 150 x 120 mm 5.91 x 5.91 x 4.73 inch |
150 x 150 x 120 mm 5.91 x 5.91 x 4.73 inch |
| Master Box QTY | 27 | 27 |
| Master Box Weight | 16.7kg 36.82lbs |
16.7kg 36.82lbs |
| Master Box Dimensions | 520 x 495 x 400 mm 20.47 x 19.49 x 15.75 inch |
520 x 495 x 400 mm 20.47 x 19.49 x 15.75 inch |
| Country of Origin | CN | CN |
MIMO-3-12
Wide Band (450-3800MHz), 2X2 MIMO LTE/5G (with or without GPS / GLONASS).
High Performance Omni-directional Antennas in a shark-fin, taller, design. Superior performance on lower bands (sub-1Ghz), meaning: superior reach & increased stability on harder to reach areas (remote/rural). Rugged, weather-proof and with Multiple Mounting Options.
I want to order
More Info
The MIMO-3-13 is a 3-in-1 high performance multi frequency antenna within a single housing, providing two cellular and a GPS/GLONASS antenna. The two cellular MIMO antennas (for 2G/3G/4G) covers the contemporary 617 MHz to 2700 MHz bands, as well as the new emerging LTE and 5G spectrum for 450MHz and 3.5GHz CBRS bands, which is becoming popular across the various international cellular network operators for LTE. The ultra-wideband performance of the antenna allows it to be used across different operators and technologies and is ready for future cellular technologies up to 3.8 GHz for 5G applications. The third antenna is a high-performance active GPS/GLONASS system operating down to -40°C. The MIMO-3-13 exceeds the performance of most competitors due to the attention to the design of this high-performance antenna. The radiation patterns of all radiating elements provide an excellent balance between omnidirectionality, pattern diversity and good radiation abilities at the desired elevation. This is an important criterion for the transportation and marine market, which the antenna was specifically designed for. Main applications are for commercial/industrial vehicles, marine, M2M and other IoT systems using a wide range of radio technologies, while remaining futureproof over the wide frequency band.
| SKU | COAX Cable Type | COAX Cable Length | Colour |
|---|---|---|---|
| A-MIMO-0003-V2-13 | HDF-195 & RTK-031 | 2m | White |
| SKU | A-MIMO-0003-V2-13 |
|---|---|
| EAN | 6009710923740 |
| HS Code | 8529.10.69 (EU) 8517.71.0000 (USA) 8529.10.90 (SA & Global) |
| Packaged Weight | 1.31kg 2.89lbs |
| Packaged Dimensions | 265 x 211 x 204 mm 10.43 x 8.31 x 8.03 inch |
| Master Box QTY | 10 |
| Master Box Weight | 16.6kg 36.6lbs |
| Master Box Dimensions | 1125 x 430 x 330mm 44.29 x 16.93 x 13 inch |
| Country of Origin | CN |
PUCK-1
Ultra-Wide Band (617 – 4200MHz), LTE/5G SISO Antenna, Smaller Aesthetic impact.
With its small Aesthetic impact, the PUCK is designed for closer-to-shore applications. Despite its size, it beats same sized competitors.
Rugged, weather-proof and with Multiple Mounting Options.
I want to order
More Info
Poynting’s new PUCK range offers a small profile antenna for use in the IoT/M2M, smart meter, smart utilities, transportation, marine and the agricultural/farming markets. The PUCK-1 is a SISO antenna, covering the 617 to 4200 MHz band, which includes the most popular international LTE/5G bands. The PUCK exceeds the performance of many competitors due to the attention to design of this high-performance antenna. The radiation patterns of all radiating elements provide an excellent balance between omnidirectionality, pattern diversity and good radiation abilities at the desired elevation, which is often overlooked in such a small size antenna. Despite its small size, this antenna provides excellent performance especially at the higher frequency bands, where performance is critical for LTE/5G throughput and connection stability.
| SKU | COAX Cable Type | COAX Cable Length | Colour |
|---|---|---|---|
| A-PUCK-0001-V1-01 | RTK-031 | 2m | Black |
| A-PUCK-0001-V1-01-W | RTK-031 | 2m | White |
| SKU | A-PUCK-0001-V1-01 | A-PUCK-0001-V1-01-W |
|---|---|---|
| EAN | 6009880915262 | 6009710920435 |
| HS Code | 8529.10.69 (EU) 8517.71.0000 (USA) 8529.10.90 (SA & Global) |
8529.10.69 (EU) 8517.71.0000 (USA) 8529.10.90 (SA & Global) |
| Packaged Weight | 0.443kg 0.98lbs |
0.443kg 0.98lbs |
| Packaged Dimensions | 150 x 150 x 120 mm 5.91 x 5.91 x 4.73 inch |
150 x 150 x 120 mm 5.91 x 5.91 x 4.73 inch |
| Master Box QTY | 27 | 27 |
| Master Box Weight | 14.95kg 32.96lbs |
14.95kg 32.96lbs |
| Master Box Dimensions | 520 x 495 x 400 mm 20.47 x 19.49 x 15.75 inch |
520 x 495 x 400 mm 20.47 x 19.49 x 15.75 inch |
| Country of Origin | CN | CN |
OMNI-280
Wide Band (617-3800MHz), SISO LTE/5G Antenna, 1m RG-58 – SMA (m) – Mounting.
The OMNI-280 is a small stick-shaped antenna, which packs a great performance in a small form factor. Give its design, it ensures top-performance regardless of the surface where it is installed.
I want to order
More Info
The OMNI-280 antenna provides an innovative solution for the signal enhancement of 4G/3G and 2G networks. It is a unique magnetic, wall- or pole-mountable, single polarised, full LTE band antenna that incorporates an ultra-wideband element in a single housing. This antenna is a cost-effective solution for enhancing signal reception and throughput. The OMNI-280 antenna increases signal reliability, ensures higher data throughput for users and provides a stable, high quality connection. This improves user experience and secures client retention. It is ideal for any application using the GSM network (LTE/HSPA/3G/EDGE/ GPRS).
| SKU | COAX Cable Type | COAX Cable Length | Colour | Other |
|---|---|---|---|---|
| A-OMNI-0280-01-V1 | RG-58 | 1m | Off White | |
| A-OMNI-0280-02-V1 | RG-58 | 2m | Off White | |
| A-OMNI-0280-08-V1 | RG-58 | 2m | Off White |
| SKU | A-OMNI-0280-01-V1 | A-OMNI-0280-02-V1 | A-OMNI-0280-08-V1 |
|---|---|---|---|
| EAN | 6009710923924 | 6009710923948 | 6009710923962 |
| HS Code | 8529.10.69 (EU) 8517.71.0000 (USA) 8529.10.90 (SA & Global) |
8529.10.69 (EU) 8517.71.0000 (USA) 8529.10.90 (SA & Global) |
8529.10.69 (EU) 8517.71.0000 (USA) 8529.10.90 (SA & Global) |
| Packaged Weight | 0.158kg 0.35lbs |
0.180kg 0.4lbs |
0.182kg 0.401lbs |
| Packaged Dimensions | 250 x 150 x 50 mm 9.84 x 5.91 x 1.97 inch |
250 x 150 x 50 mm 9.84 x 5.91 x 1.97 inch |
250 x 150 x 50 mm 9.84 x 5.91 x 1.97 inch |
| Master Box QTY | 50 | 50 | 50 |
| Master Box Weight | 7.93kg 17.48lbs |
9.36kg 20.64lbs |
9.410kg 20.75lbs |
| Master Box Dimensions | 500 x 330 x 320 mm 19.69 x 13 x 12.6 inch |
500 x 330 x 320 mm 19.69 x 13 x 12.6 inch |
500 x 330 x 320 mm 19.69 x 13 x 12.6 inch |
| Country of Origin | CN | CN | CN |
XPOL-1-v2-41
A 4×4 MIMO, cross-polarized, Ultra-Wide Band (690 – 3800 MHz), Omni-directional (3dBi) Antenna, w/ 5m twin HDF-195 cables, with SMA (m) connectors options.
This makes the antenna perfect for most application areas, such as urban, rural, agricultural and commercial, to achieve the best possible coverage over a large area.
I want to order
More Info
The XPOL-1-5G is Poynting’s second generation “V2” of this very popular Cross Polarised (XPOL), cellular band, 2×2 MIMO antenna. The addition of a 4X4 MIMO derivative is also available for user specific needs. The antenna has been completely redesigned form the previous generation with an all new enclosure and antenna design. The antenna now includes the newer 3400 – 3800 MHz bands as well as the in demand lower 690 MHz band, which were not previously covered by our V1 and is suitable for 2G, 3G, 4G & 5G. This antenna performs exceptionally well in the following frequency bands: 690 – 960 MHz, 1700 – 2170 MHz, 2300 – 2700 MHz & 3400 – 3800 MHz, with a peak gain of 4 dBi across the frequency bands of operation. The radiation patterns of this antenna are omni-directional and exceptionally well controlled, further adding to the performance of the antenna. This makes the antenna perfect for most application areas, such as urban, rural, agricultural and commercial, to achieve the best possible coverage over a large area. The robust mechanical enclosure design makes the antenna weather, dust and vandal resistant and gives it an IP65 rating, suitable for harsh environments.
| SKU | COAX Cable Type | COAX Cable Length | Colour | Other |
|---|---|---|---|---|
| A-XPOL-0001-V2-21 | HDF-195 | 5m | White | |
| A-XPOL-0001-V2-41 | HDF-195 | 5m | White |
| SKU | A-XPOL-0001-V2-21 | A-XPOL-0001-V2-41 |
|---|---|---|
| EAN | 6009710920763 | 6009710920886 |
| HS Code | 8529.10.69 (EU) 8517.71.0000 (USA) 8529.10.90 (SA & Global) |
8529.10.69 (EU) 8517.71.0000 (USA) 8529.10.90 (SA & Global) |
| Packaged Weight | 1.05kg 2.31lbs |
1.34kg 2.95lbs |
| Packaged Dimensions | 270 x 190 x 100 mm 10.63 x 7.48 x 3.94 inch |
270 x 190 x 100 mm 10.63 x 7.48 x 3.94 inch |
| Master Box QTY | 20 | 20 |
| Master Box Weight | 19.5kg 43lbs |
27.62kg 60.89lbs |
| Master Box Dimensions | 550 x 390 x 500mm 21.65 x 15.35 x 19.68 inch |
550 x 390 x 500mm 21.65 x 15.35 x 19.68 inch |
| Country of Origin | CN | CN |
OMNI-214
A 4×4 MIMO Ultra-Wide Band (617-3800 MHz) Omni-directional (3.5dBi) Antenna, w/ 2m twin HDF-195 cables, with SMA (m) connectors.
The ultra-wideband performance makes the antenna future proof, as it covers LTE Band 71 (617 to 698 MHz) as well as the CBRS bands from 3400 to 3800 MHz for inland use. The antenna comes with an IP65 protection rating against dust and water ingress, making it ideal for urban and commercial deployments.
I want to order
More Info
The OMNI-214 is an ultra-wideband antenna, which covers all contemporary LTE/5G frequency bands with excellent balanced gain across all frequencies from 617 to 3800 MHz. The antenna offers 4×4 MIMO capability from its vertically separated radiating elements, all in the same single radome. The antenna design allows for superior pattern control over the entire frequency range, making the OMNI-214 a true omni-directional 4×4 MIMO antenna, suitable for urban or commercial applications. The OMNI-214 guarantees signal reception almost everywhere and is usable in all part of the world. The ultra-wideband performance makes the antenna future proof, as it covers LTE Band 71 (617 to 698 MHz) as well as the CBRS bands from 3400 to 3800 MHz for inland use. The antenna comes with an IP65 protection rating against dust and water ingress, making it ideal for urban and commercial deployments.
| SKU | COAX Cable Type | COAX Cable Length | Colour | Other |
|---|---|---|---|---|
| A-OMNI-0214-V1-01 | HDF-195 | 2m | White |
| SKU | A-OMNI-0214-V1-01 |
|---|---|
| EAN | 6009710923665 |
| HS Code | 8529.10.69 (EU) 8517.71.0000 (USA) 8529.10.90 (SA & Global) |
| Packaged Weight | 1.59kg 3.51lbs |
| Packaged Dimensions | 690 x 95 x 96 mm 27.17 x 3.74 x 3.78 inch |
| Master Box QTY | 24 |
| Master Box Weight | 39.47kg 87.02lbs |
| Master Box Dimensions | 400 x 600 x 810 mm 15.75 x 23.62 x 31.89 inch |
| Country of Origin | CN |
OMNI-293
Ultra-Wide Band (617 – 3800 MHz), Omni-Directional (9dBi) Antenna, N-Type connector.
The antenna is future proof as it covers the up and coming 617 to 698 MHz band, as well as 3400 to 3800 MHz which will be utilized for future 5G applications. The antenna comes with an N-Type female connector at its base, which can be connected to a cable of the desired type and length.
I want to order
More Info
The OMNI-293 is an ultra-wideband, high performance, omni-directional antenna that covers the contemporary 4G/LTE and future 5G operating frequencies with excellent balanced gain across all frequencies. The ultra-wideband performance from the antenna allows it to operate from 617 to 3800 MHz, with a peak gain of 9 dBi. This makes the antenna usable in all parts of the world and guarantees signal reception almost everywhere. The antenna design allows for superior pattern control over the entire frequency range, making the OMNI-293 a true high performance omni-directional antenna, suitable for urban and rural applications. Poynting antennas achieves this performance through new antenna design, where multiple dipoles and a unique (patented) feed network is implemented. The antenna is future proof as it covers the up and coming 617 to 698 MHz band, as well as 3400 to 3800 MHz which will be utilized for future 5G applications. The antenna comes with an N-Type female connector at its base, which can be connected to a cable of the desired type and length.
| SKU | COAX Cable Type | COAX Cable Length | Colour | Other |
|---|---|---|---|---|
| A-OMNI-0293-V1-01 | N/A | N/A | Off White |
| SKU | A-OMNI-0293-V1-01 |
|---|---|
| EAN | 6009710922347 |
| HS Code | 8529.10.69 (EU) 8517.71.0000 (USA) 8529.10.90 (SA & Global) |
| Packaged Weight | 1.14kg 2.51lbs |
| Packaged Dimensions | 690 x 95 x 95 mm 27.17 x 3.74 x 3.74 inch |
| Master Box QTY | 24 |
| Master Box Weight | 29.04kg 64.02lbs |
| Master Box Dimensions | 810 x 600 x 400 mm 31.89 x 23.62 x 15.75 inch |
| Country of Origin | CN |
OMNI-600
A 2×2 MIMO Ultra-Wide Band (410-3800 MHz) Omni-directional (6.2dBi) Antenna, w/ 5m twin HDF-195 cables, with SMA (m) connectors.
The OMNI-600 guarantees signal reception almost everywhere, making it usable in all parts of the world. Poynting Antennas achieves this through new antenna configuration using multiple dipoles and a unique (patented) feed network.
I want to order
More Info
The OMNI-600 is a unique new design with improved 2×2 MIMO electrical performance. The ultra-wide band covers all contemporary operating frequencies with excellent balanced gain across all frequencies. Higher frequencies are not compromised, and the antenna design allows Poynting to have superior pattern control over the entire frequency range, making the OMNI-600 a true high performance omni-directional antenna. The OMNI-600 guarantees signal reception almost everywhere, making it usable in all parts of the world. Poynting Antennas achieves this through new antenna configuration using multiple dipoles and a unique (patented) feed network. The antenna is future proof as it covers the 450 MHz frequency and 3.5 GHz CBRS band which is gaining popularity in various regions and countries.
- 2X2 MIMO high performance omni-directional antenna
- Consistent gain over a wide frequency band
- Increased connectivity stability
- Excellent broadband quality antenna
- Vandal and water-resistant enclosure
XPOL-1-v2-21
A 2×2 MIMO, cross-polarized, Ultra-Wide Band (690 – 3800 MHz), Omni-directional (3dBi) Antenna, w/ 5m twin HDF-195 cables, with SMA (m) connectors options.
This makes the antenna perfect for most application areas, such as urban, rural, agricultural and commercial, to achieve the best possible coverage over a large area.
I want to order
More Info
The XPOL-1-5G is Poynting’s second generation “V2” of this very popular Cross Polarised (XPOL), cellular band, 2×2 MIMO antenna. The addition of a 4X4 MIMO derivative is also available for user specific needs. The antenna has been completely redesigned form the previous generation with an all new enclosure and antenna design. The antenna now includes the newer 3400 – 3800 MHz bands as well as the in demand lower 690 MHz band, which were not previously covered by our V1 and is suitable for 2G, 3G, 4G & 5G. This antenna performs exceptionally well in the following frequency bands: 690 – 960 MHz, 1700 – 2170 MHz, 2300 – 2700 MHz & 3400 – 3800 MHz, with a peak gain of 4 dBi across the frequency bands of operation. The radiation patterns of this antenna are omni-directional and exceptionally well controlled, further adding to the performance of the antenna. This makes the antenna perfect for most application areas, such as urban, rural, agricultural and commercial, to achieve the best possible coverage over a large area. The robust mechanical enclosure design makes the antenna weather, dust and vandal resistant and gives it an IP65 rating, suitable for harsh environments.
| SKU | COAX Cable Type | COAX Cable Length | Colour | Other |
|---|---|---|---|---|
| A-XPOL-0001-V2-21 | HDF-195 | 5m | White | |
| A-XPOL-0001-V2-41 | HDF-195 | 5m | White |
| SKU | A-XPOL-0001-V2-21 | A-XPOL-0001-V2-41 |
|---|---|---|
| EAN | 6009710920763 | 6009710920886 |
| HS Code | 8529.10.69 (EU) 8517.71.0000 (USA) 8529.10.90 (SA & Global) |
8529.10.69 (EU) 8517.71.0000 (USA) 8529.10.90 (SA & Global) |
| Packaged Weight | 1.05kg 2.31lbs |
1.34kg 2.95lbs |
| Packaged Dimensions | 270 x 190 x 100 mm 10.63 x 7.48 x 3.94 inch |
270 x 190 x 100 mm 10.63 x 7.48 x 3.94 inch |
| Master Box QTY | 20 | 20 |
| Master Box Weight | 19.5kg 43lbs |
27.62kg 60.89lbs |
| Master Box Dimensions | 550 x 390 x 500mm 21.65 x 15.35 x 19.68 inch |
550 x 390 x 500mm 21.65 x 15.35 x 19.68 inch |
| Country of Origin | CN | CN |
OMNI-293
Ultra-Wide Band (617 – 3800 MHz), Omni-Directional (9dBi) Antenna, N-Type connector.
The antenna is future proof as it covers the up and coming 617 to 698 MHz band, as well as 3400 to 3800 MHz which will be utilized for future 5G applications. The antenna comes with an N-Type female connector at its base, which can be connected to a cable of the desired type and length.
I want to order
More Info
The OMNI-293 is an ultra-wideband, high performance, omni-directional antenna that covers the contemporary 4G/LTE and future 5G operating frequencies with excellent balanced gain across all frequencies. The ultra-wideband performance from the antenna allows it to operate from 617 to 3800 MHz, with a peak gain of 9 dBi. This makes the antenna usable in all parts of the world and guarantees signal reception almost everywhere. The antenna design allows for superior pattern control over the entire frequency range, making the OMNI-293 a true high performance omni-directional antenna, suitable for urban and rural applications. Poynting antennas achieves this performance through new antenna design, where multiple dipoles and a unique (patented) feed network is implemented. The antenna is future proof as it covers the up and coming 617 to 698 MHz band, as well as 3400 to 3800 MHz which will be utilized for future 5G applications. The antenna comes with an N-Type female connector at its base, which can be connected to a cable of the desired type and length.
| SKU | COAX Cable Type | COAX Cable Length | Colour | Other |
|---|---|---|---|---|
| A-OMNI-0293-V1-01 | N/A | N/A | Off White |
| SKU | A-OMNI-0293-V1-01 |
|---|---|
| EAN | 6009710922347 |
| HS Code | 8529.10.69 (EU) 8517.71.0000 (USA) 8529.10.90 (SA & Global) |
| Packaged Weight | 1.14kg 2.51lbs |
| Packaged Dimensions | 690 x 95 x 95 mm 27.17 x 3.74 x 3.74 inch |
| Master Box QTY | 24 |
| Master Box Weight | 29.04kg 64.02lbs |
| Master Box Dimensions | 810 x 600 x 400 mm 31.89 x 23.62 x 15.75 inch |
| Country of Origin | CN |
OMNI-292
Wide Band (690 – 2700 MHz) Omni-directional (8 dBi) Antenna, N-type connector.
This is one of the few omni-directional antennas in the world that offers consistent high gain over a very wide frequency band with excellent radiation pattern performance.
I want to order
More Info
The OMNI-292 is a high gain omni-directional antenna that covers all cellular frequencies bands needed for LTE(4G), but also covers the bands for HSDPA, 3G, EDGE, GPRS, voice and 2.4 GHz LTE and Wi-Fi bands. Its configuration makes it suitable for fixed installations of any cellular frequency band. This is one of the few omni-directional antennas in the world that offers consistent high gain over a very wide frequency band with excellent radiation pattern performance. This makes it a very popular choice with installers because of its base station agile. It is also ideal for machine to machine (M2M) applications that are communicating through GSM network (GPRS/ EDGE/ 3G/ HSPA/ LTE).
| SKU | COAX Cable Type | COAX Cable Length | Colour | Other |
|---|---|---|---|---|
| A-OMNI-0292-V2 | N/A | N/A | Off White |
| SKU | A-OMNI-0292-V2 |
|---|---|
| EAN | 6009710923726 |
| HS Code | 8529.10.69 (EU) 8517.71.0000 (USA) 8529.10.90 (SA & Global) |
| Packaged Weight | 1.242kg 2.74lbs |
| Packaged Dimensions | 700 x 95 x 95 mm 27.56 x 3.74 x 3.74 inch |
| Master Box QTY | 24 |
| Master Box Weight | 29.8kg 65.7lbs |
| Master Box Dimensions | 810 x 600 x 400 mm 31.89 x 23.62 x 15.75 inch |
| Country of Origin | CN |
OMNI-121
Wide Band LTE Omnidirectional Antenna, 698 – 2700MHz, max. Gain: 6 dBi, with stainless steel pole mount bracket, IP65.
The antenna is a popular choice with installers because of its versatile base station capabilities. It is also ideal for machine to machine (M2M) applications that are communicating through GSM network (GPRS/ EDGE/ 3G/ HSPA/ LTE).
I want to order
More Info
This medium gain omni-directional antenna covers the GSM 900, GSM1800 / UMTS and LTE frequency bands. It is a light-weight antenna that is easy to install. This is a cost- effective omni-directional solution as it comes with a 5m cable. The antenna is a popular choice with installers because of its versatile base station capabilities. It is also ideal for machine to machine (M2M) applications that are communicating through GSM network (GPRS/ EDGE/ 3G/ HSPA/ LTE).
| SKU | COAX Cable Type | COAX Cable Length | Colour | Other |
|---|---|---|---|---|
| A-OMNI-0121-V3 | HDF-195 | 8m | Off White | |
| A-OMNI-0121-01-V3 | HDF-195 | 5m | Off White | |
| A-OMNI-0121-03-V3 | HDF-195 | 5m | Off White |
| SKU | A-OMNI-0121-V3 | A-OMNI-0121-01-V3 | A-OMNI-0121-03-V3 |
|---|---|---|---|
| EAN | 6009710923887 | 6009710923900 | 6009710922507 |
| HS Code | 8529.10.69 (EU) 8517.71.0000 (USA) 8529.10.90 (SA & Global) |
8529.10.69 (EU) 8517.71.0000 (USA) 8529.10.90 (SA & Global) |
8529.10.69 (EU) 8517.71.0000 (USA) 8529.10.90 (SA & Global) |
| Packaged Weight | 0.72kg 1.59lbs |
0.6kg 1.32lbs |
0.63kg 1.39lbs |
| Packaged Dimensions | 595 x 130 x 65 mm 23.43 x 5.12 x 2.56 inch |
595 x 130 x 65 mm 23.43 x 5.12 x 2.56 inch |
595 x 130 x 65 mm 23.43 x 5.12 x 2.56 inch |
| Master Box QTY | 20 | 20 | 20 |
| Master Box Weight | 14.8kg 32.63lbs |
14.4kg 31.75lbs |
14.4kg 31.75lbs |
| Master Box Dimensions | 610 x 545 x 352 mm 24.02 x 21.46 x 13.86 inch |
610 x 545 x 352 mm 24.02 x 21.46 x 13.86 inch |
610 x 545 x 352 mm 24.02 x 21.46 x 13.86 inch |
| Country of Origin | CN | CN | CN |
WaveHunter
High gain, multi-directional, multi-polarization cellular antenna dome.
5G dome shaped POYNTING maritime antenna. With its high-gain directional, multi-polarization and virtual lossless cables, it is the antenna that will provide the smoothest, furthest from shore and highest throughput internet connection available in the market. Does so, by ensuring each router/radio gets the best possible connection! Available only from certified distributors.
I want to order
More Info
Poynting Antennas introduces its all-new antenna enclosure range, the WaveHunter™ series. The WaveHunter™ enclosure is designed to fit a variety of router and networking modules, transforming the antenna enclosure into a CPE (Customer Premises Equipment) – just add your own LTE/5G routers and networking equipment. The WaveHunter™ enclosure can accommodate two routers up to the size of 450x280x110mm³ / 17.717×11.02×4.33 inch mounted directly to the base. Additional equipment can be added within a stacked customised user supplied frame. The WaveHunter™ antenna enclosure uses our world renowned Artificial Magnetic Conductor (AMC) technology from our XPOL-2-5G antenna. The antenna array consists of 12 cross-polarised, high gain, 2×2 MIMO directional antennas arranged in two stacked arrays offset at 60° increments. This provides 360° wideband coverage from 617 to 960 MHz and 1710 to 4200 MHz, with a peak gain of 11 dBi, making it ideal for Multi-router LTE & 5G bonded and aggregated deployments. The enclosure was also designed to withstand adverse weather condition, making the antenna weatherproof and waterproof with an IP65 rating.
| SKU | COAX Cable Type | COAX Cable Length | Colour | Other |
|---|---|---|---|---|
| A-WHUNTER-001-V3-101 | N/A | N/A | White | |
| A-WHUNTER-001-V3-102 | N/A | N/A | White |
| SKU | A-WHUNTER-001-V3-101 | A-WHUNTER-001-V3-102 |
|---|---|---|
| EAN | 6009710925980 | 6009710926000 |
| HS Code | 8529.10.69 (EU) 8517.71.0000 (USA) 8529.10.90 (SA & Global) |
8529.10.69 (EU) 8517.71.0000 (USA) 8529.10.90 (SA & Global) |
| Packaged Weight | 89kg 196lbs |
82kg 180.7lbs |
| Packaged Dimensions | 684 x 684 x 1080 mm 26.93 x 26.93 x 42.52 inch |
684 x 684 x 938 mm 26.93 x 26.93 x 36.93 inch |
| Master Box QTY | 1 | 1 |
| Master Box Weight | 89kg 196lbs |
82kg 180.7lbs |
| Master Box Dimensions | 684 x 684 x 1080 mm 26.93 x 26.93 x 42.52 inch |
684 x 684 x 938 mm 26.93 x 26.93 x 36.93 inch |
| Country of Origin | RSA | RSA |
RIPPLE-16
Cross-polarized, omni-directional cellular antenna dome.
5G dome shaped POYNTING maritime antenna. With its cross-polarized antenna design and virtual lossless cables, it will ensure twice the throughput of traditional vertical-polarized antenna setups. Differs from the Wavehunter, as each router connected to the respective antenna ports, is then able to connect 360º. While with the WaveHunter, each router is responsible for covering a given direction.
I want to order
More Info
Poynting Antennas introduces its all-new marine antenna enclosure range, the Ripple antenna enclosure, which adds to our current WaveHunter series. The Ripple antenna enclosure is designed to fit a variety of router and networking modules, transforming the antenna enclosure into a CPE (Customer Premises Equipment) device – just add your own LTE/5G routers. The Ripple enclosure can accommodate routers up to the size of 300 x 250 x 110 mm³, which can be mounted directly onto the base. The flagship unit will be the RIPL-16 antenna array that consists of 16 cross-polarised, omni-directional antennas arranged in a cross-polarised orientation with 8 x vertically and 8 x horizontally polarised, for improved performance. There is also a RIPL-8 antenna solution, which contains 8 cross-polarised, omni-directional antennas with 4 x vertically and 4 x horizontally polarised. The antennas offer wideband coverage from 617 to 7200 MHz, with a peak gain of 9.5 dBi. Making it ideal for multi-router LTE & 5G bonded and aggregated deployments. The enclosure was designed to withstand adverse weather conditions, making the antenna weatherproof with an IP 65 rating. The antenna enclosure was designed specifically for marine & coastal applications.
| SKU | COAX Cable Type | COAX Cable Length | Colour | Other |
|---|---|---|---|---|
| A-RIPL-0016-V1-01 | RG-316 | 0.35m | White |
| SKU | A-RIPL-0016-V1-01 |
|---|---|
| EAN | 6009710927199 |
| HS Code | 8529.10.69 (EU) 8517.71.0000 (USA) 8529.10.90 (SA & Global) |
| Packaged Weight | 25.0kg 55.1lbs |
| Packaged Dimensions | 530 x 530 x 630 mm 20.9 x 20.9 x 24.8 inch |
| Master Box QTY | 1 |
| Master Box Weight | 25.0kg 55.1lbs |
| Master Box Dimensions | 496 x 410 x 410 mm 19.5 x 16.1 x 16.1 inch |
| Country of Origin | RSA |
PATCH-26
Medium gain, high performance directional antenna.
Narrowband antenna, 820-970MHz, with a well balanced gain and radiation pattern across the Lora frequencies. 30cm cable, N-Type(f) connector. Pole and Wall Mount.
8dBi @ 868Mhz| 1.2 VSWR @ 868Mhz | 60º horizontal @ 868Mhz | 60º vertical @ 868Mhz
I want to order
More Info
The PATCH-26 antenna covers both EU and USA RFID bands. The antenna has been designed to be water-resistant and is easy to install. It is linearly polarised for reading in any orientation. The antenna is linearly polarised and can also be used to improve indoor GSM coverage. VSWR is typically less than 1.4:1, giving a return loss better than 20dB. This antenna is unique in the RFID environment because of its VSWR & gain specifications.
| SKU | COAX Cable Type | COAX Cable Length | Colour | Other |
|---|---|---|---|---|
| A-PATCH-0026 | HDF-195 | 0.3m | Off White | |
| A-PATCH-0026 |
| SKU | A-PATCH-0026 |
|---|---|
| EAN | 6009693810020 |
| HS Code | 8529.10.69 (EU) 8517.71.0000 (USA) 8529.10.90 (SA & Global) |
| Packaged Weight | 0.75kg 1.65lbs |
| Packaged Dimensions | 335 x 250 x 95 mm 13.19 x 9.84 x 3.74 inch |
| Master Box QTY | 10 |
| Master Box Weight | 12.93kg- 28.51lbs |
| Master Box Dimensions | 530 x 362 x 505 mm 20.87 x 14.25 x 19.88 inch |
| Country of Origin | CN |
XPOL-2-5G
Broadband antenna, 617-4200MHz, with a well balanced gain and radiation pattern across the Lora frequencies. Multiple cable/connector options. Pole and Wall Mount.
11dBi @ 868Mhz | 1.5 VSWR @ 868Mhz | 80º horizontal @ 868Mhz | 60º vertical @ 868Mhz
I want to order
More Info
The XPOL-2-5G is Poynting’s third generation “V3” of this very popular Cross Polarised (XPOL), cellular band, 2×2 MIMO antenna. The antenna enclosure effectively looks the same as the second generation “V2” but has been completely redesigned on the inside. We have used advanced metamaterial technology, making use of Artificial Magnetic Conductors (AMC) and new registered/patent pending radiator configuration, which is proving to yield exceptional improvements in bandwidth and gain. Radiation patterns of this antenna are exceptionally well controlled, further adding to the performance of the antenna. The XPOL-2-5G antenna includes the newer 3400 – 4200 MHz bands, which were not previously covered by our V2 and is suitable for 2G, 3G, 4G & 5G. This antenna performs exceptionally well in the following frequency bands: 617 – 960 MHz, 1710 – 2170 MHz, 2300 – 2700 MHz & 3400 – 4200 MHz in addition to the new bands, the gain in the 1700 MHz and 2.7 GHz is around 3 dB higher than the “V2” over the same frequency bands! Our “V2” antenna already outperformed most competitors over these bands, so this substantial improvement in gain shows the benefits of the new advanced materials and novel radiator design. So, if it was a car, we installed an entirely new technology engine producing twice the power under the bonnet – it may look the same, but just wait until you turn the ignition on!
| SKU | COAX Cable Type | COAX Cable Length | Colour | Other |
|---|---|---|---|---|
| A-XPOL-0002-V3-01 | Twin HDF-195 | 5m | White | |
| A-XPOL-0002-V3-02 | N/A | N/A | White | |
| A-XPOL-0002-V3-03 | Twin HDF-195 | 10m | White |
| SKU | A-XPOL-0002-V3-01 | A-XPOL-0002-V3-02 | A-XPOL-0002-V3-03 |
|---|---|---|---|
| EAN | 6009880915750 | 6009710920107 | 6009710920121 |
| HS Code | 8529.10.69 (EU) 8517.71.0000 (USA) 8529.10.90 (SA & Global) |
8529.10.69 (EU) 8517.71.0000 (USA) 8529.10.90 (SA & Global) |
8529.10.69 (EU) 8517.71.0000 (USA) 8529.10.90 (SA & Global) |
| Packaged Weight | 1.98kg 4.37lbs |
1.86kg 4.1lbs |
2.3kg 5.07lbs |
| Packaged Dimensions | 375x267x100mm 14.76×10.51×3.94inch |
375x267x120mm 14.76×10.51 x4.72 inch |
375x267x100mm 14.76×10.51×3.94inch |
| Master Box QTY | 10 | 8 | 10 |
| Master Box Weight | 22.7kg 50.04lbs |
19kg 41.89lbs |
24.07kg 53.07lbs |
| Master Box Dimensions | 550 x 390 x 500mm 21.65 x 15.35 x 19.67 inch |
550 x 390 x 500mm 21.65 x 15.35 x 19.67 inch |
550 x 390 x 500mm 21.65 x 15.35 x 19.67 inch |
| Country of Origin | CN | CN | CN |
OMNI-300
Medium gain, high performance omnidirectional antenna. Narrowband antenna, 868-930MHz, with a well balanced gain and radiation pattern across the Lora frequencies. Multiple cable/connector options. Pole and Wall Mount.
868 – 930 MHz
4.5dBi @ 868MHz
1.5 VSWR @ 868MHZ
I want to order
More Info
The OMNI-300 antenna is an omni-directional, medium gain antenna that covers the 868 to 930 MHz frequency bands. It is ideal for Machine to Machine (M2M) and Internet of Things (IoT) applications that communicate through the LoRa, and ISM bands for long distance communication. The OMNI-300 antenna increases signal reliability, ensures higher data throughput, and provides a stable, high quality connection. The OMNI-300 is a popular choice for installers because of its versatile mounting options, as it can be wall or pole mounted and comes with an N-Type (female) connector at its base. The antenna is dust and water-resistant with an IP65 rating, making it ideal for outdoor deployment.
| SKU | COAX Cable Type | COAX Cable Length | Colour | Other |
|---|---|---|---|---|
| A-OMNI-0300-V2-01 | N/A | N/A | White | |
| A-OMNI-0300-V2-02 | HDF-195 | 5m |
| SKU | A-OMNI-0300-V2-01 | A-OMNI-0300-V2-02 |
|---|---|---|
| EAN | 6009710922033 | 6009710924310 |
| HS Code | 8529.10.69 (EU) 8517.71.0000 (USA) 8529.10.90 (SA & Global) |
8529.10.69 (EU) 8517.71.0000 (USA) 8529.10.90 (SA & Global) |
| Packaged Weight | 0.51kg 1.12lbs |
0.60kg 1.32lbs |
| Packaged Dimensions | 595 x 130 x 65 mm 23.43 x 5.12 x 2.56 inch |
595 x 130 x 65 mm 23.43 x 5.12 x 2.56 inch |
| Master Box QTY | 20 | 20 |
| Master Box Weight | 10.2kg 22.49lbs |
11.62kg 25.62lbs |
| Master Box Dimensions | 610 x 545 x 352 mm 24.02 x 21.46 x 13.86 inch |
610 x 545 x 352 mm 24.02 x 21.46 x 13.86 inch |
| Country of Origin | CN | CN |
OMNI-292
Medium gain, high performance omnidirectional antenna. Broadband antenna, 617-2700MHz, with a well balanced gain and radiation pattern across the Lora frequencies. No cable, N-Type(f) connector. Pole and Wall Mount.
5.5dBi @ 868MHz
1.5 VSWR @ 868MHZ
I want to order
More Info
The OMNI-292 is a high gain omni-directional antenna that covers all cellular frequencies bands needed for LTE(4G), but also covers the bands for HSDPA, 3G, EDGE, GPRS, voice and 2.4 GHz LTE and Wi-Fi bands. Its configuration makes it suitable for fixed installations of any cellular frequency band. This is one of the few omni-directional antennas in the world that offers consistent high gain over a very wide frequency band with excellent radiation pattern performance. This makes it a very popular choice with installers because of its base station agile. It is also ideal for machine to machine (M2M) applications that are communicating through GSM network (GPRS/ EDGE/ 3G/ HSPA/ LTE).
| SKU | COAX Cable Type | COAX Cable Length | Colour | Other |
|---|---|---|---|---|
| A-OMNI-0292-V2 | N/A | N/A | Off White |
| SKU | A-OMNI-0292-V2 |
|---|---|
| EAN | 6009710923726 |
| HS Code | 8529.10.69 (EU) 8517.71.0000 (USA) 8529.10.90 (SA & Global) |
| Packaged Weight | 1.242kg 2.74lbs |
| Packaged Dimensions | 700 x 95 x 95 mm 27.56 x 3.74 x 3.74 inch |
| Master Box QTY | 24 |
| Master Box Weight | 29.8kg 65.7lbs |
| Master Box Dimensions | 810 x 600 x 400 mm 31.89 x 23.62 x 15.75 inch |
| Country of Origin | CN |
MIMO-3 Series
Very High Performance Omni-directional Antennas in a taller shark-fin design.
Superior performance on lower bands (sub-1Ghz), meaning: superior reach & increased stability on harder to reach areas (remote/rural). The MIMO-3 comes in a configuration which goes up to 4×4 LTE/5G and 2×2 Wi-Fi. Rugged, weather-proof and with Multiple Mounting Options.
I want to order
More Info
Superior performance on lower bands (sub-1Ghz), meaning: superior reach & increased stability on harder to reach areas (remote/rural).
The MIMO-3 comes in a configuration which goes up to 4×4 LTE/5G and 2×2 Wi-Fi.
Rugged, weather-proof and with Multiple Mounting Options.
Size: 253mm x 128mm x 144mm
A-MIMO-0003-V1-15/15-B: 2 x (4/5G) + 2 x Wi-Fi (Dual-Band) + 1 x GPS
A-MIMO-0004-V1-14: 4 x Cellular(4/5G) + 1 x GPS
A-MIMO-0003-V1-17/17-B: 4 x (4/5G) + 2 x Wi-Fi (Dual-Band) + 1 x GPS
MIMO-4 Series
High Performance Omni-directional Antennas in our traditional PUCK design (slightly bigger).
The natural upgrade from our well stablished PUCK antennas, which given its size has compromises made in the lower-frequencies’ performance. The MIMO-4 comes in a configuration which goes up to 4×4 LTE/5G and 4×4 Wi-Fi. Beats same sized competitors. Slightly inferior performance on very-hard to reach locations (remote/rural), compared to the MIMO-3 Series.
Rugged, weather-proof and with Multiple Mounting Options.
I want to order
More Info
The natural upgrade from our well stablished PUCK antennas, which given its size has compromises made in the lower-frequencies’ performance.
The MIMO-4 comes in a configuration which goes up to 4×4 LTE/5G and 4×4 Wi-Fi.
Beats same sized competitors. Slightly inferior performance on very-hard to reach locations (remote/rural), compared to the MIMO-3 Series.
Rugged, weather-proof and with Multiple Mounting Options.
Size: Ø160 mm x 65 mm
A-MIMO-0004-V1-17-W/-B: 4 x (4/5G) + 2 x Wi-Fi (Dual-Band) + 1 x GPS
A-MIMO-0004-V1-19-W/-B: 4 x Cellular(4/5G) + 4 x Wi-Fi (Dual-Band) + 1 x GPS
MIMO-4 Series
High Performance Omni-directional Antennas in our traditional PUCK design (slightly bigger).
The natural upgrade from our well stablished PUCK antennas, which given its size has compromises made in the lower-frequencies’ performance. The MIMO-4 comes in a configuration which goes up to 4×4 LTE/5G and 4×4 Wi-Fi. Beats same sized competitors. Slightly inferior performance on very-hard to reach locations (remote/rural), compared to the MIMO-3 Series. Rugged, weather-proof and with Multiple Mounting Options.
I want to order
More Info
The natural upgrade from our well stablished PUCK antennas, which given its size has compromises made in the lower-frequencies’ performance.
The MIMO-4 comes in a configuration which goes up to 4×4 LTE/5G and 4×4 Wi-Fi.
Beats same sized competitors. Slightly inferior performance on very-hard to reach locations (remote/rural), compared to the MIMO-3 Series.
Rugged, weather-proof and with Multiple Mounting Options.
Size: Ø160 mm x 65 mm
A-MIMO-0004-V1-17-W/-B: 4 x (4/5G) + 2 x Wi-Fi (Dual-Band) + 1 x GPS
A-MIMO-0004-V1-19-W/-B: 4 x Cellular(4/5G) + 4 x Wi-Fi (Dual-Band) + 1 x GPS
PUCK Series
Best-in size-class, multiple configuration antenna. Built around a single, or dual, LTE antenna element.
With its small Aesthetic impact, the PUCK is designed for suburban and urban applications. Despite its size, it beats same sized competitors. The PUCK series comes in a configuration which goes up to 2×2 LTE/5G and 2×2 Wi-Fi. Rugged, weather-proof and with Multiple Mounting Options.
I want to order
More Info
Poynting’s new PUCK range offers a small profile antenna for use in the IoT/M2M, smart meter, smart utilities, transportation, marine and the agricultural/farming markets. The PUCK-1 is a SISO antenna, covering the 617 to 4200 MHz band, which includes the most popular international LTE/5G bands. The PUCK exceeds the performance of many competitors due to the attention to design of this high-performance antenna. The radiation patterns of all radiating elements provide an excellent balance between omnidirectionality, pattern diversity and good radiation abilities at the desired elevation, which is often overlooked in such a small size antenna. Despite its small size, this antenna provides excellent performance especially at the higher frequency bands, where performance is critical for LTE/5G throughput and connection stability.
| SKU | COAX Cable Type | COAX Cable Length | Colour | Other |
|---|---|---|---|---|
| A-PUCK-0001-V1-01 | RTK-031 | 2m | Black | |
| A-PUCK-0001-V1-01-W | RTK-031 | 2m | White |
WLAN-61
4×4 MIMO Directional Antenna, 9dBi, 60º V/H aperture, at 2.4GHz.
The WLAN-61 is a dual-band directional antenna, that may also be used as a 2.4GHz, or 5GHz, only antenna. At 2.4GHz the antenna has a 9dBi peak gain and 60º V/H apertures.
I want to order
More Info
The WLAN-61 is a dual-band Wi-Fi MIMO antenna, developed by Poynting Antennas, can connect to any Wi-Fi access point whether it is older Wi-Fi technology or new dual-band Wi-Fi technology. Multiple dual-band antennas can resolve channel saturation and provide the ultimate in Wi-Fi performance and flexibility. This 4×4 MIMO antenna has 4 different antenna orientations in one enclosure. This means the antenna can be used in a 2×2, 3×3 and if necessary, a 4×4 antenna configuration. The wide beamwidth ensures good coverage in offices, halls and factories etc. The antenna operates in the two Wi-Fi frequency bands 2.4 GHz and 5 GHz, offering excellent utilization of the radio spectrum. The antenna has 9 dBi gain in the 2.4 GHz band and 11 dBi gain in the 5 GHz band, which offers the best performance with a reliable connection. The housing is made of ABS which is a high impact resistant plastic and is also resistant to acids and other chemicals that may occur in industrial plants. The antenna can be opened on the side where the 4 x SMA female connectors are placed. The cable can be fed through the bypass gland, which eliminates the joint to the antenna extension cables. This eliminates connector losses and the need for taping and waterproofing the connectors for an outdoor installation. This antenna is designed for installations where 4×4 (four independent streams), multiplexing time-space technologies is needed. It can be used indoors or outdoors and is ideal for use in warehouses, production facilities, building sites or any other environment that requires Wi-Fi connectivity, such as computers, mobile phones, tablets, and any other IoT devices.
| SKU | COAX Cable Type | COAX Cable Length | Colour | Other |
|---|---|---|---|---|
| A-WLAN-0061-V1 | N/A | N/A | Off White |
OMNI-294
X-Polarised, Omni-Directional, 4×4 MIMO Antenna. 7dBi gain at 2.4GHz.
The OMNI-294 is a dual-band omni-directional antenna, that may also be used as a 2.4GHz, or 5GHz, only antenna. An innovative approach to omni-antennas. The OMNI-294 is a dual-polarized omni-directional antenna, capable of providing up to 2x the throughputs of traditional single-polarized antennas, maximizing the MIMO performance of the AP.
I want to order
More Info
The OMNI-294 is a dual-band omni-directional antenna, that may also be used as a 2.4GHz, or 5GHz, only antenna.
An innovative approach to omni-antennas. The OMNI-294 is a dual-polarized omni-directional antenna, capable of providing up to 2x the throughputs of traditional single-polarized antennas, maximizing the MIMO performance of the AP.
Size: 650 mm x Ø75 mm
MIMO-4-4
4×4 Omni-directional Antennas in our traditional PUCK design. 2dBi gain at 2.4GHz.
The MIMO-4-04 is a dual-band omni-directional antenna, that may also be used as a 2.4GHz, or 5GHz, only antenna. Rugged, weather-proof and with Multiple Mounting Options, the MIMO-4-04 fits a variety of deployment scenarios.
I want to order
More Info
The MIMO-4-4 is a 4-in-1 high-performance, multi-frequency antenna with four cellular antennas within a single housing. The four cellular MIMO antennas offer wideband coverage from 617 to 6000 MHz, covering contemporary LTE/4G and 5G bands for future-proof implementation. The ultra-wideband performance of the cellular antennas allows it to be used across different operators and technologies and is ready for future cellular technologies up to 6 GHz for 5G applications. The MIMO-4-4 exceeds the performance of most competitors due to the attention to the design of this high-performance antenna. All radiating elements’ radiation patterns provide an excellent balance between omni-directionality, pattern diversity, and good radiation abilities at the desired elevation. This is an important criterion for the transportation and marine market, which the antenna was specifically designed for. Main applications are for commercial/industrial vehicles, marine, M2M, and other IoT systems using a wide range of radio technologies while remaining futureproof over the wide frequency band.
| SKU | COAX Cable Type | COAX Cable Length | Colour |
|---|---|---|---|
| A-MIMO-0004-V1-04-B | RTK-031 | 2m | Black |
| A-MIMO-0004-V1-04-W | RTK-031 | 2m | White |
| SKU | A-MIMO-0004-V1-04-B | A-MIMO-0004-V1-04-W |
|---|---|---|
| EAN | 6009710927694 | 6009710927670 |
| HS Code | 8529.10.69 (EU) 8517.71.0000 (USA) 8529.10.90 (SA & Global) |
8529.10.69 (EU) 8517.71.0000 (USA) 8529.10.90 (SA & Global) |
| Packaged Weight | 1.18kg 2.60lbs |
1.18kg 2.60lbs |
| Packaged Dimensions | 230 x 220 x 150 mm 9.05 x 8.66 x 5.9 inch |
230 x 220 x 150 mm 9.05 x 8.66 x 5.9 inch |
| Master Box QTY | 8 | 8 |
| Master Box Weight | 10.66kg 23.50lbs |
10.66kg 23.50lbs |
| Master Box Dimensions | 565 x 465 x 315 mm 22.24 x 18.31 x 12.40 inch |
565 x 465 x 315 mm 22.24 x 18.31 x 12.40 inch |
| Country of Origin | CN | CN |
WLAN-61
2×2 MIMO Directional Antenna, 9dBi, 60º V/H aperture.
The WLAN-61 is a dual-band directional antenna, that may also be used as a 2.4GHz, or 5GHz, only antenna. At 2.4GHz the antenna has a 9dBi peak gain and 60º V/H apertures. The antenna is 4×4, but may be used as 2×2.
I want to order
More Info
The WLAN-61 is a dual-band Wi-Fi MIMO antenna, developed by Poynting Antennas, can connect to any Wi-Fi access point whether it is older Wi-Fi technology or new dual-band Wi-Fi technology. Multiple dual-band antennas can resolve channel saturation and provide the ultimate in Wi-Fi performance and flexibility. This 4×4 MIMO antenna has 4 different antenna orientations in one enclosure. This means the antenna can be used in a 2×2, 3×3 and if necessary, a 4×4 antenna configuration. The wide beamwidth ensures good coverage in offices, halls and factories etc. The antenna operates in the two Wi-Fi frequency bands 2.4 GHz and 5 GHz, offering excellent utilization of the radio spectrum. The antenna has 9 dBi gain in the 2.4 GHz band and 11 dBi gain in the 5 GHz band, which offers the best performance with a reliable connection. The housing is made of ABS which is a high impact resistant plastic and is also resistant to acids and other chemicals that may occur in industrial plants. The antenna can be opened on the side where the 4 x SMA female connectors are placed. The cable can be fed through the bypass gland, which eliminates the joint to the antenna extension cables. This eliminates connector losses and the need for taping and waterproofing the connectors for an outdoor installation. This antenna is designed for installations where 4×4 (four independent streams), multiplexing time-space technologies is needed. It can be used indoors or outdoors and is ideal for use in warehouses, production facilities, building sites or any other environment that requires Wi-Fi connectivity, such as computers, mobile phones, tablets, and any other IoT devices.
| SKU | COAX Cable Type | COAX Cable Length | Colour | Other |
|---|---|---|---|---|
| A-WLAN-0061-V1 | N/A | N/A | Off White |
OMNI-298
Omni-Directional, 2×2 MIMO Antenna. 7dBi gain at 2.4GHz.
The OMNI-294 is a dual-band omni-directional antenna, that may also be used as a 2.4GHz, or 5GHz, only antenna.
I want to order
More Info
The OMNI-294 is a dual-band omni-directional antenna, that may also be used as a 2.4GHz, or 5GHz, only antenna.
An innovative approach to omni-antennas. The OMNI-294 is a dual-polarized omni-directional antenna, capable of providing up to 2x the throughputs of traditional single-polarized antennas, maximizing the MIMO performance of the AP.
Size: 650 mm x Ø75 mm
PUCK 12
2×2 Omni-directional Antennas in our traditional PUCK design. 5dBi gain at 2.4GHz.
The PUCK-12 is a dual-band omni-directional antenna, that may also be used as a 2.4GHz, or 5GHz, only antenna. Rugged, weather-proof and with Multiple Mounting Options, the PUCK-12 fits a variety of deployment scenarios.
I want to order
More Info
Poynting’s new PUCK range offers a small profile antenna that can be used in the IoT/M2M, Smart Meter, Smart Utilities, Transportation, Marine, and Agricultural/Farming markets. The PUCK-12 comprises a 2-in-1 antenna system within a single housing, featuring 2×2 MIMO Wi-Fi (Dual-band 2.4 GHz & 5 GHz). The antenna provides two separate dual-band Wi-Fi antennas offering concurrent 2.4 GHz, 5 GHz, and 6GHz bands, capable of 802.11n and 802.11ac/ax/be with 2×2 MIMO. The PUCK exceeds many competitors’ performance due to the attention to the design of this high-performance antenna. The radiation patterns of all radiating elements provide an excellent balance between omnidirectionality, pattern diversity, and good radiation abilities at the desired elevation, which is often overlooked in such a small-size antenna. Despite its small size, this antenna provides excellent performance, especially at the higher frequency bands, where performance is critical for Wi-Fi throughput and connection stability.
| SKU | COAX Cable Type | COAX Cable Length | Colour | Other |
|---|---|---|---|---|
| A-PUCK-0012-V2-01 | RTK-031 | 2m | Black | |
| A-PUCK-0012-V2-01-W | RTK-031 | 2m | White |
WLAN-60
Directional Antenna, 9dBi, 40º V/H aperture.
The WLAN-60 is a dual-band directional antenna, that may also be used as a 2.4GHz, or 5GHz, only antenna. At 2.4GHz the antenna has a 9dBi peak gain and 40º V/H apertures.
I want to order
More Info
The WLAN-60 antenna is dual-band Wi-Fi antenna, developed by Poynting Antennas. The WLAN-60 antenna is a linear high gain, dual band antenna in one enclosure. The antenna can connect to any Wi-Fi access point whether it is older Wi-Fi technology or new dual band Wi-Fi technology. The antennas can therefore be used to resolve channel saturation and provide the ultimate in Wi-Fi performance and flexibility. This means that the antenna can be used for point to point links where there is an abundance of RF noise and cluttered environments. The antenna operates in the two Wi-Fi frequency bands (2.4 GHz and 5 GHz), offering excellent utilization of the radio spectrum. The antenna has a maximum gain of 13dBi in the 2.4GHz band and 18dBi in the 5GHz band, which offers the best performance with reliable connections. The antenna also covers the 3.5 GHz CBRS band, which will be used for future 5G technologies with a peak gain of 15dBi. The housing is made of ABS which is a high impact resistant plastic and is also resistant to acids and other chemicals that may occur in industrial plants. The antenna can be opened on the side where an SMA female connector is placed. You can then feed the cable through the bypass gland, which means you do not have to join the antenna cable to extension cables. This eliminates connector losses and the need for taping and waterproofing the connectors for an outdoor installation.
| SKU | COAX Cable Type | COAX Cable Length | Colour | Other |
|---|---|---|---|---|
| A-WLAN-0060-V1 | N/A | N/A | Off White |
LPDA-500
High-gain Directional Antenna, 11dBi, 30º V/H aperture.
The LPDA-500 is a dual-band directional antenna, that may also be used as a 2.4GHz, or 5GHz, only antenna. At 2.4GHz the antenna has a 11dBi peak gain and 30º V/H apertures.
I want to order
More Info
The LPDA-500 is Poynting’s new and improved log-periodic dipole array (LPDA) antenna. The LPDA-500 is a high-gain, ultra-wideband, uni-directional antenna that operate from 617 to 7200 MHz. The ultra-wideband coverage includes current 5G and future cellular bands as well as Wi-Fi and Wi-Fi 6E bands. The LPDA-500 has consistent high-gain performance across the entire band of operation, making the antenna suitable for the deployment of various wireless communication systems. Our previous LPDA has been successfully used in extreme weather environments across the world with close to zero failures, with the new LPDA-500 being no different. The LPDA-500 comes standard with a new and improved mounting bracket, which can be rotated at 45° intervals. This will allow for ease of installation and the customer will be able to mount multiple LPDA-500 antennas and orientate them in a MIMO configuration, i.e., vertical, and horizontal or ±45°. Poynting Antennas are well known for designing future proof antennas and the new LPDA-500 is no different.
| SKU | COAX Cable Type | COAX Cable Length | Colour | Other |
|---|---|---|---|---|
| A-LPDA-0500-V1-01 | N/A | N/A | Silver |
| SKU | A-LPDA-0500-V1-01 |
|---|---|
| EAN | 6009710925447 |
| HS Code | 8529.10.69 (EU) 8517.71.0000 (USA) 8529.10.90 (SA & Global) |
| Packaged Weight | 3.34kg 7.36lbs |
| Packaged Dimensions | 1385 x 250 x 145 mm 54.53 x 9.84 x 5.71 inch |
| Master Box QTY | 4 |
| Master Box Weight | 15.36kg 33.86lbs |
| Master Box Dimensions | 1440 x 565 x 340 mm 56.69 x 22.24 x 13.39 inch |
| Country of Origin | CN |
OMNI-702
Ultra-rugged Omni-Directional, SISO. 6dBi gain at 2.4GHz.
The OMNI-702 is part of Poynting’s Rhyno Series. A Series of ultra-rugged antennas, for the harshest environments: IP69k, IK10, operating temp. range of -40°C to +80°C and an L-Bracket made of Stainless Steel.
I want to order
More Info
The OMNI-702 antenna is an omni-directional Wi-Fi antenna, developed by Poynting Antennas. The antenna operates from 2.4 – 2.5 GHz, covering the 2.4 GHz Wi-Fi band, and has a maximum gain of 6dBi. The constant gain throughout the entire band offers improved performance with reliable connections. The antenna was designed for superior pattern control over the entire frequency range, making the OMNI-702 an exceptional omni-directional antenna for its size. The antenna can connect to any Wi-Fi access point and resolve channel saturation and provide ultimate Wi-Fi performance and flexibility. The rugged enclosure design offers protection in adverse environmental conditions with an IP69K and IK 10 rating. The antenna has an N-Type female connector at its base, which can be connected to a cable of the desired type and length.
| SKU | COAX Cable Type | COAX Cable Length | Colour | Other |
|---|---|---|---|---|
| A-OMNI-0702-V1-01 | N/A | N/A | Grey |
| SKU | A-OMNI-0702-V1-01 |
|---|---|
| EAN | 6009710921999 |
| HS Code | 8529.10.69 (EU) 8517.71.0000 (USA) 8529.10.90 (SA & Global) |
| Packaged Weight | 0.56kg 1.23lbs |
| Packaged Dimensions | 386 x 80 x 96 mm 15.2 x 3.15 x 3.78 inch |
| Master Box QTY | 35 |
| Master Box Weight | 20.80kg 45.86lbs |
| Master Box Dimensions | 610 x 500 x 400 mm 24.02 x 19.68 x 15.75 inch |
| Country of Origin | CN |
OMNI-296
Omni-Directional, SISO Antenna. 7dBi gain at 2.4GHz
The OMNI-296 is a dual-band omni-directional antenna, that may also be used as a 2.4GHz, or 5GHz, only antenna.
I want to order
More Info
The OMNI-296 antenna is a dual-band Wi-Fi omni-directional antenna, developed by Poynting Antennas. The antenna can connect to any Wi-Fi access point whether it is older Wi-Fi technology or new dual-band Wi-Fi technology. The antenna can therefore be used to resolve channel saturation and provide the ultimate in Wi-Fi performance and flexibility. This means that the antenna can also be used for point-to-point links where there is an abundance of RF noise and cluttered environments. The antenna operates across multiple frequency bands, i.e., 2.4 GHz, 3.3 to 4.2 GHz, and 5 to 7.2 GHz offering excellent utilization of the radio spectrum. The antenna has a maximum gain of 7dBi in the 2.4GHz band and 10dBi in the 5GHz band, which offers the best performance with reliable connections. The antenna also covers the 3.5 GHz CBRS band, which will be used for future 5G technologies with a peak gain of 8dBi. The housing is made of ABS which is a high-impact resistant plastic and is also resistant to acids and other chemicals that may occur in industrial plants. The antenna has an N-Type female connector at its base which can be connected to a cable of the desired type and length.
| SKU | COAX Cable Type | COAX Cable Length | Colour | Other |
|---|---|---|---|---|
| A-OMNI-0296-V2-01 | N/A | N/A | White |
| SKU | A-OMNI-0296-V2 |
|---|---|
| EAN | 6009710925744 |
| HS Code | 8529.10.69 (EU) 8517.71.0000 (USA) 8529.10.90 (SA & Global) |
| Packaged Weight | 0.91kg 2lbs |
| Packaged Dimensions | 510 x 95 x 95 mm 20.1 x 3.74 x 3.74 inch |
| Master Box QTY | 20 |
| Master Box Weight | 21.30kg 46.96lbs |
| Master Box Dimensions | 530 x 490 x 400 mm 20.86 x 19.29 x 15.75 inch |
| Country of Origin | CN |
PUCK-1
OMNI-directional, SISO Antenna, 4dBi gain at 2.4GHz.
The PUCK-1 is 600-6000MHz antenna, that may also be used as a 2.4GHz, or 5GHz, only antenna. Rugged, weather-proof and with Multiple Mounting Options, the PUCK-1 fits a variety of deployment scenarios.
I want to order
More Info
Poynting’s new PUCK range offers a small profile antenna for use in the IoT/M2M, smart meter, smart utilities, transportation, marine and the agricultural/farming markets. The PUCK-1 is a SISO antenna, covering the 617 to 4200 MHz band, which includes the most popular international LTE/5G bands. The PUCK exceeds the performance of many competitors due to the attention to design of this high-performance antenna. The radiation patterns of all radiating elements provide an excellent balance between omnidirectionality, pattern diversity and good radiation abilities at the desired elevation, which is often overlooked in such a small size antenna. Despite its small size, this antenna provides excellent performance especially at the higher frequency bands, where performance is critical for LTE/5G throughput and connection stability.
| SKU | COAX Cable Type | COAX Cable Length | Colour |
|---|---|---|---|
| A-PUCK-0001-V1-01 | RTK-031 | 2m | Black |
| A-PUCK-0001-V1-01-W | RTK-031 | 2m | White |
| SKU | A-PUCK-0001-V1-01 | A-PUCK-0001-V1-01-W |
|---|---|---|
| EAN | 6009880915262 | 6009710920435 |
| HS Code | 8529.10.69 (EU) 8517.71.0000 (USA) 8529.10.90 (SA & Global) |
8529.10.69 (EU) 8517.71.0000 (USA) 8529.10.90 (SA & Global) |
| Packaged Weight | 0.443kg 0.98lbs |
0.443kg 0.98lbs |
| Packaged Dimensions | 150 x 150 x 120 mm 5.91 x 5.91 x 4.73 inch |
150 x 150 x 120 mm 5.91 x 5.91 x 4.73 inch |
| Master Box QTY | 27 | 27 |
| Master Box Weight | 14.95kg 32.96lbs |
14.95kg 32.96lbs |
| Master Box Dimensions | 520 x 495 x 400 mm 20.47 x 19.49 x 15.75 inch |
520 x 495 x 400 mm 20.47 x 19.49 x 15.75 inch |
| Country of Origin | CN | CN |
WLAN-61
5-6GHz, 4×4 MIMO Directional Antenna, 11dBi, 30º V/H aperture.
The WLAN-61 is a dual-band directional antenna, that may also be used as a 2.4GHz, or 5GHz, only antenna. At 5.4GHz the antenna has a 11dBi peak gain and 30º V/H apertures.
I want to order
More Info
The WLAN-61 is a dual-band Wi-Fi MIMO antenna, developed by Poynting Antennas, can connect to any Wi-Fi access point whether it is older Wi-Fi technology or new dual-band Wi-Fi technology. Multiple dual-band antennas can resolve channel saturation and provide the ultimate in Wi-Fi performance and flexibility. This 4×4 MIMO antenna has 4 different antenna orientations in one enclosure. This means the antenna can be used in a 2×2, 3×3 and if necessary, a 4×4 antenna configuration. The wide beamwidth ensures good coverage in offices, halls and factories etc. The antenna operates in the two Wi-Fi frequency bands 2.4 GHz and 5 GHz, offering excellent utilization of the radio spectrum. The antenna has 9 dBi gain in the 2.4 GHz band and 11 dBi gain in the 5 GHz band, which offers the best performance with a reliable connection. The housing is made of ABS which is a high impact resistant plastic and is also resistant to acids and other chemicals that may occur in industrial plants. The antenna can be opened on the side where the 4 x SMA female connectors are placed. The cable can be fed through the bypass gland, which eliminates the joint to the antenna extension cables. This eliminates connector losses and the need for taping and waterproofing the connectors for an outdoor installation. This antenna is designed for installations where 4×4 (four independent streams), multiplexing time-space technologies is needed. It can be used indoors or outdoors and is ideal for use in warehouses, production facilities, building sites or any other environment that requires Wi-Fi connectivity, such as computers, mobile phones, tablets, and any other IoT devices.
| SKU | COAX Cable Type | COAX Cable Length | Colour | Other |
|---|---|---|---|---|
| A-WLAN-0061-V1 | N/A | N/A | Off White |
OMNI-294
X-Polarised, Omni-Directional, 4×4 MIMO Antenna. 8dBi gain at 5.4GHz.
The OMNI-294 is a dual-band omni-directional antenna, that may also be used as a 2.4GHz, or 5GHz, only antenna. The antenna operates from 2.4GHz to 7.2GHz – Wi-Fi6E compatible. An innovative approach to omni-antennas. The OMNI-294 is a dual-polarized omni-directional antenna, capable of providing up to 2x the throughputs of traditional single-polarized antennas, maximizing the MIMO performance of the AP.
I want to order
More Info
The OMNI-294 is a dual-band omni-directional antenna, that may also be used as a 2.4GHz, or 5GHz, only antenna.
An innovative approach to omni-antennas. The OMNI-294 is a dual-polarized omni-directional antenna, capable of providing up to 2x the throughputs of traditional single-polarized antennas, maximizing the MIMO performance of the AP.
Size: 650 mm x Ø75 mm
MIMO-4-4
4×4 Omni-directional Antennas in our traditional PUCK design. 6dBi gain at 5.4GHz.
The MIMO-4-04 is a dual-band omni-directional antenna, that may also be used as a 2.4GHz, or 5GHz, only antenna. The antenna operates from 600 to 6000MHz. Rugged, weather-proof and with Multiple Mounting Options, the MIMO-4-04 fits a variety of deployment scenarios.
I want to order
More Info
The MIMO-4-4 is a 4-in-1 high-performance, multi-frequency antenna with four cellular antennas within a single housing. The four cellular MIMO antennas offer wideband coverage from 617 to 6000 MHz, covering contemporary LTE/4G and 5G bands for future-proof implementation. The ultra-wideband performance of the cellular antennas allows it to be used across different operators and technologies and is ready for future cellular technologies up to 6 GHz for 5G applications. The MIMO-4-4 exceeds the performance of most competitors due to the attention to the design of this high-performance antenna. All radiating elements’ radiation patterns provide an excellent balance between omni-directionality, pattern diversity, and good radiation abilities at the desired elevation. This is an important criterion for the transportation and marine market, which the antenna was specifically designed for. Main applications are for commercial/industrial vehicles, marine, M2M, and other IoT systems using a wide range of radio technologies while remaining futureproof over the wide frequency band.
| SKU | COAX Cable Type | COAX Cable Length | Colour |
|---|---|---|---|
| A-MIMO-0004-V1-04-B | RTK-031 | 2m | Black |
| A-MIMO-0004-V1-04-W | RTK-031 | 2m | White |
| SKU | A-MIMO-0004-V1-04-B | A-MIMO-0004-V1-04-W |
|---|---|---|
| EAN | 6009710927694 | 6009710927670 |
| HS Code | 8529.10.69 (EU) 8517.71.0000 (USA) 8529.10.90 (SA & Global) |
8529.10.69 (EU) 8517.71.0000 (USA) 8529.10.90 (SA & Global) |
| Packaged Weight | 1.18kg 2.60lbs |
1.18kg 2.60lbs |
| Packaged Dimensions | 230 x 220 x 150 mm 9.05 x 8.66 x 5.9 inch |
230 x 220 x 150 mm 9.05 x 8.66 x 5.9 inch |
| Master Box QTY | 8 | 8 |
| Master Box Weight | 10.66kg 23.50lbs |
10.66kg 23.50lbs |
| Master Box Dimensions | 565 x 465 x 315 mm 22.24 x 18.31 x 12.40 inch |
565 x 465 x 315 mm 22.24 x 18.31 x 12.40 inch |
| Country of Origin | CN | CN |
WLAN-61
5-6GHz, 4×4 MIMO Directional Antenna, 11dBi, 30º V/H aperture.
The WLAN-61 is a dual-band directional antenna, that may also be used as a 2.4GHz, or 5GHz, only antenna. The antenna operates up to 6GHz. At 5.4GHz the antenna has a 11dBi peak gain and 30º V/H apertures. The antenna is 4×4, but may be used as 2×2.
I want to order
More Info
The WLAN-61 is a dual-band Wi-Fi MIMO antenna, developed by Poynting Antennas, can connect to any Wi-Fi access point whether it is older Wi-Fi technology or new dual-band Wi-Fi technology. Multiple dual-band antennas can resolve channel saturation and provide the ultimate in Wi-Fi performance and flexibility. This 4×4 MIMO antenna has 4 different antenna orientations in one enclosure. This means the antenna can be used in a 2×2, 3×3 and if necessary, a 4×4 antenna configuration. The wide beamwidth ensures good coverage in offices, halls and factories etc. The antenna operates in the two Wi-Fi frequency bands 2.4 GHz and 5 GHz, offering excellent utilization of the radio spectrum. The antenna has 9 dBi gain in the 2.4 GHz band and 11 dBi gain in the 5 GHz band, which offers the best performance with a reliable connection. The housing is made of ABS which is a high impact resistant plastic and is also resistant to acids and other chemicals that may occur in industrial plants. The antenna can be opened on the side where the 4 x SMA female connectors are placed. The cable can be fed through the bypass gland, which eliminates the joint to the antenna extension cables. This eliminates connector losses and the need for taping and waterproofing the connectors for an outdoor installation. This antenna is designed for installations where 4×4 (four independent streams), multiplexing time-space technologies is needed. It can be used indoors or outdoors and is ideal for use in warehouses, production facilities, building sites or any other environment that requires Wi-Fi connectivity, such as computers, mobile phones, tablets, and any other IoT devices.
| SKU | COAX Cable Type | COAX Cable Length | Colour | Other |
|---|---|---|---|---|
| A-WLAN-0061-V1 | N/A | N/A | Off White |
OMNI-298
Omni-Directional, 2×2 MIMO Antenna. 8dBi gain at 5.4GHz.
The OMNI-294 is a dual-band omni-directional antenna, that may also be used as a 2.4GHz, or 5GHz, only antenna. The antenna operates from 2.4GHz to 7.2GHz – Wi-Fi6E compatible.
I want to order
More Info
The OMNI-294 is a dual-band omni-directional antenna, that may also be used as a 2.4GHz, or 5GHz, only antenna.
An innovative approach to omni-antennas. The OMNI-294 is a dual-polarized omni-directional antenna, capable of providing up to 2x the throughputs of traditional single-polarized antennas, maximizing the MIMO performance of the AP.
Size: 650 mm x Ø75 mm
PUCK 12
2×2 Omni-directional Antennas in our traditional PUCK design. 2dBi gain at 5.4GHz.
The PUCK-12 is a dual-band omni-directional antenna, that may also be used as a 2.4GHz, or 5GHz, only antenna. The antenna operates from 2.4GHz to 7.2GHz – Wi-Fi6E compatible. Rugged, weather-proof and with Multiple Mounting Options, the PUCK-12 fits a variety of deployment scenarios.
I want to order
More Info
Poynting’s new PUCK range offers a small profile antenna that can be used in the IoT/M2M, Smart Meter, Smart Utilities, Transportation, Marine, and Agricultural/Farming markets. The PUCK-12 comprises a 2-in-1 antenna system within a single housing, featuring 2×2 MIMO Wi-Fi (Dual-band 2.4 GHz & 5 GHz). The antenna provides two separate dual-band Wi-Fi antennas offering concurrent 2.4 GHz, 5 GHz, and 6GHz bands, capable of 802.11n and 802.11ac/ax/be with 2×2 MIMO. The PUCK exceeds many competitors’ performance due to the attention to the design of this high-performance antenna. The radiation patterns of all radiating elements provide an excellent balance between omnidirectionality, pattern diversity, and good radiation abilities at the desired elevation, which is often overlooked in such a small-size antenna. Despite its small size, this antenna provides excellent performance, especially at the higher frequency bands, where performance is critical for Wi-Fi throughput and connection stability.
| SKU | COAX Cable Type | COAX Cable Length | Colour | Other |
|---|---|---|---|---|
| A-PUCK-0012-V2-01 | RTK-031 | 2m | Black | |
| A-PUCK-0012-V2-01-W | RTK-031 | 2m | White |
WLAN-60
High-gain directional Antenna, 14dBi, 20º V/H aperture.
The WLAN-60 is a dual-band directional antenna, that may also be used as a 2.4GHz, or 5GHz, only antenna. The antenna operates up to 6GHz. At 5.4GHz the antenna has a 11dBi peak gain and 20º V/H apertures.
I want to order
More Info
The WLAN-60 antenna is dual-band Wi-Fi antenna, developed by Poynting Antennas. The WLAN-60 antenna is a linear high gain, dual band antenna in one enclosure. The antenna can connect to any Wi-Fi access point whether it is older Wi-Fi technology or new dual band Wi-Fi technology. The antennas can therefore be used to resolve channel saturation and provide the ultimate in Wi-Fi performance and flexibility. This means that the antenna can be used for point to point links where there is an abundance of RF noise and cluttered environments. The antenna operates in the two Wi-Fi frequency bands (2.4 GHz and 5 GHz), offering excellent utilization of the radio spectrum. The antenna has a maximum gain of 13dBi in the 2.4GHz band and 18dBi in the 5GHz band, which offers the best performance with reliable connections. The antenna also covers the 3.5 GHz CBRS band, which will be used for future 5G technologies with a peak gain of 15dBi. The housing is made of ABS which is a high impact resistant plastic and is also resistant to acids and other chemicals that may occur in industrial plants. The antenna can be opened on the side where an SMA female connector is placed. You can then feed the cable through the bypass gland, which means you do not have to join the antenna cable to extension cables. This eliminates connector losses and the need for taping and waterproofing the connectors for an outdoor installation.
| SKU | COAX Cable Type | COAX Cable Length | Colour | Other |
|---|---|---|---|---|
| A-WLAN-0060-V1 | N/A | N/A | Off White |
LPDA-500
Directional Antenna, 10dBi, 20º V/H aperture.
The LPDA-500 is a dual-band directional antenna, that may also be used as a 2.4GHz, or 5GHz, only antenna. The antenna operates from 2.4GHz to 7.2GHz – Wi-Fi6E compatible. At 5.4GHz the antenna has a 10dBi peak gain and 20º V/H apertures.
I want to order
More Info
The LPDA-500 is Poynting’s new and improved log-periodic dipole array (LPDA) antenna. The LPDA-500 is a high-gain, ultra-wideband, uni-directional antenna that operate from 617 to 7200 MHz. The ultra-wideband coverage includes current 5G and future cellular bands as well as Wi-Fi and Wi-Fi 6E bands. The LPDA-500 has consistent high-gain performance across the entire band of operation, making the antenna suitable for the deployment of various wireless communication systems. Our previous LPDA has been successfully used in extreme weather environments across the world with close to zero failures, with the new LPDA-500 being no different. The LPDA-500 comes standard with a new and improved mounting bracket, which can be rotated at 45° intervals. This will allow for ease of installation and the customer will be able to mount multiple LPDA-500 antennas and orientate them in a MIMO configuration, i.e., vertical, and horizontal or ±45°. Poynting Antennas are well known for designing future proof antennas and the new LPDA-500 is no different.
| SKU | COAX Cable Type | COAX Cable Length | Colour | Other |
|---|---|---|---|---|
| A-LPDA-0500-V1-01 | N/A | N/A | Silver |
| SKU | A-LPDA-0500-V1-01 |
|---|---|
| EAN | 6009710925447 |
| HS Code | 8529.10.69 (EU) 8517.71.0000 (USA) 8529.10.90 (SA & Global) |
| Packaged Weight | 3.34kg 7.36lbs |
| Packaged Dimensions | 1385 x 250 x 145 mm 54.53 x 9.84 x 5.71 inch |
| Master Box QTY | 4 |
| Master Box Weight | 15.36kg 33.86lbs |
| Master Box Dimensions | 1440 x 565 x 340 mm 56.69 x 22.24 x 13.39 inch |
| Country of Origin | CN |
OMNI-296
Omni-Directional, SISO Antenna. 9.5dBi gain at 5.4GHz.
The OMNI-296 is a dual-band omni-directional antenna, that may also be used as a 2.4GHz, or 5GHz, only antenna. The antenna operates up to 7.2GHz – Wi-Fi6E compatible.
I want to order
More Info
The OMNI-296 antenna is a dual-band Wi-Fi omni-directional antenna, developed by Poynting Antennas. The antenna can connect to any Wi-Fi access point whether it is older Wi-Fi technology or new dual-band Wi-Fi technology. The antenna can therefore be used to resolve channel saturation and provide the ultimate in Wi-Fi performance and flexibility. This means that the antenna can also be used for point-to-point links where there is an abundance of RF noise and cluttered environments. The antenna operates across multiple frequency bands, i.e., 2.4 GHz, 3.3 to 4.2 GHz, and 5 to 7.2 GHz offering excellent utilization of the radio spectrum. The antenna has a maximum gain of 7dBi in the 2.4GHz band and 10dBi in the 5GHz band, which offers the best performance with reliable connections. The antenna also covers the 3.5 GHz CBRS band, which will be used for future 5G technologies with a peak gain of 8dBi. The housing is made of ABS which is a high-impact resistant plastic and is also resistant to acids and other chemicals that may occur in industrial plants. The antenna has an N-Type female connector at its base which can be connected to a cable of the desired type and length.
| SKU | COAX Cable Type | COAX Cable Length | Colour | Other |
|---|---|---|---|---|
| A-OMNI-0296-V2-01 | N/A | N/A | White |
| SKU | A-OMNI-0296-V2 |
|---|---|
| EAN | 6009710925744 |
| HS Code | 8529.10.69 (EU) 8517.71.0000 (USA) 8529.10.90 (SA & Global) |
| Packaged Weight | 0.91kg 2lbs |
| Packaged Dimensions | 510 x 95 x 95 mm 20.1 x 3.74 x 3.74 inch |
| Master Box QTY | 20 |
| Master Box Weight | 21.30kg 46.96lbs |
| Master Box Dimensions | 530 x 490 x 400 mm 20.86 x 19.29 x 15.75 inch |
| Country of Origin | CN |
OMNI-705
Ultra-rugged Omni-Directional, SISO. 6.5dBi gain at 5.4GHz
The OMNI-705 is part of Poynting’s Rhyno Series. A Series of ultra-rugged antennas, for the harshest environments: IP69k, IK10, operating temp. range of -40°C to +80°C and an L-Bracket made of Stainless Steel. The antenna operates up to 6GHz. Note: for a smaller form-factor, with a smaller gain, check OMNI-704.
I want to order
More Info
he OMNI-705 antenna is an omni-directional Wi-Fi antenna, developed by Poynting Antennas. The antenna operates from 5.0 – 6.0 GHz, covering the 5 GHz Wi-Fi band, and has a maximum gain of 7.5dBi. The constant gain throughout the entire band offers improved performance with reliable connections. The antenna was designed for superior pattern control over the entire frequency range, making the OMNI-705 an exceptional omni-directional antenna for its size. The antenna can connect to any Wi-Fi access point and resolve channel saturation and provide ultimate Wi-Fi performance and flexibility. The rugged enclosure design offers protection in adverse environmental conditions with an IP69K and IK 10 rating. The antenna has an N-Type female connector at its base, which can be connected to a cable of the desired type and length.
| SKU | COAX Cable Type | COAX Cable Length | Colour | Other |
|---|---|---|---|---|
| A-OMNI-0705-V1-01 | N/A | N/A | Grey |
| SKU | A-OMNI-0705-V1-01 |
|---|---|
| EAN | 6009710922248 |
| HS Code | 8529.10.69 (EU) 8517.71.0000 (USA) 8529.10.90 (SA & Global) |
| Packaged Weight | 0.56kg 1.23lbs |
| Packaged Dimensions | 386 x 80 x 96 mm 15.2 x 3.15 x 3.78 inch |
| Master Box QTY | 35 |
| Master Box Weight | 20.80kg 45.86lbs |
| Master Box Dimensions | 610 x 500 x 400 mm 24.02 x 19.68 x 15.75 inch |
| Country of Origin | CN |
OMNI-704
Ultra-rugged Omni-Directional, SISO. 3.5dBi gain at 5.4GHz.
The OMNI-704 is part of Poynting’s Rhyno Series. A Series of ultra-rugged antennas, for the harshest environments: IP69k, IK10, operating temp. range of -40°C to +80°C and an L-Bracket made of Stainless Steel. The antenna operates up to 6GHz.
I want to order
More Info
The OMNI-704 antenna forms part of our new POYNTING “Rhyno” antenna range. The OMNI-704 operates from 5.0 – 6.0 GHz, covering the upper half of the 5 GHz Wi-Fi band, and has a maximum gain of 4 dBi. The antenna has a constant gain throughout the entire band of operation, as this offers improved performance with reliable connections. The antenna was designed with superior pattern control over the entire frequency range, making the OMNI-704 an exceptional omni-directional antenna for its size. The antenna housing is made of UV stable ASA, which offers protection in highly corrosive environments, including chemical and toxic environments such as industrial plants. The rugged enclosure design offers protection in adverse environmental conditions with an IP69K and IK 10 rating. The antenna has an N-Type female connector at its base, which can be connected to a cable of the desired type and length.
| SKU | COAX Cable Type | COAX Cable Length | Colour | Other |
|---|---|---|---|---|
| A-OMNI-0704-V1-01 | N/A | N/A | Grey |
| SKU | A-OMNI-0704-V1-01 |
|---|---|
| EAN | 6009710921975 |
| HS Code | 8529.10.69 (EU) 8517.71.0000 (USA) 8529.10.90 (SA & Global) |
| Packaged Weight | 0.405kg 0.89lbs |
| Packaged Dimensions | 236 x 80 x 96 mm 9.29 x 3.15 x 3.78 inch |
| Master Box QTY | 50 |
| Master Box Weight | 21.26kg 46.87lbs |
| Master Box Dimensions | 520 x 495 x 400 mm 20.47 x 19.49 x 15.75 inch |
| Country of Origin | CN |
WLAN-61
Frequencies: 2.4GHz&5-6GHz, 4×4 MIMO Directional Antenna, 11dBi.
The WLAN-61 is a dual-band directional antenna, that may also be used as a 2.4GHz, or 5GHz, only antenna. Both frequency bands are present at each connector (concurrent). At 2.4GHz the antenna has a 9dBi peak gain and 60º V/H apertures. At 5.4GHz the antenna has a 11dBi peak gain and 30º V/H apertures.
I want to order
More Info
The WLAN-61 is a dual-band Wi-Fi MIMO antenna, developed by Poynting Antennas, can connect to any Wi-Fi access point whether it is older Wi-Fi technology or new dual-band Wi-Fi technology. Multiple dual-band antennas can resolve channel saturation and provide the ultimate in Wi-Fi performance and flexibility. This 4×4 MIMO antenna has 4 different antenna orientations in one enclosure. This means the antenna can be used in a 2×2, 3×3 and if necessary, a 4×4 antenna configuration. The wide beamwidth ensures good coverage in offices, halls and factories etc. The antenna operates in the two Wi-Fi frequency bands 2.4 GHz and 5 GHz, offering excellent utilization of the radio spectrum. The antenna has 9 dBi gain in the 2.4 GHz band and 11 dBi gain in the 5 GHz band, which offers the best performance with a reliable connection. The housing is made of ABS which is a high impact resistant plastic and is also resistant to acids and other chemicals that may occur in industrial plants. The antenna can be opened on the side where the 4 x SMA female connectors are placed. The cable can be fed through the bypass gland, which eliminates the joint to the antenna extension cables. This eliminates connector losses and the need for taping and waterproofing the connectors for an outdoor installation. This antenna is designed for installations where 4×4 (four independent streams), multiplexing time-space technologies is needed. It can be used indoors or outdoors and is ideal for use in warehouses, production facilities, building sites or any other environment that requires Wi-Fi connectivity, such as computers, mobile phones, tablets, and any other IoT devices.
| SKU | COAX Cable Type | COAX Cable Length | Colour | Other |
|---|---|---|---|---|
| A-WLAN-0061-V1 | N/A | N/A | Off White |
OMNI-294
Frequencies: 2.4GHz&5-7.2GHz, X-Polarised, Omni-Directional, 4×4 MIMO.
The OMNI-294 is a dual-band omni-directional antenna, that may also be used as a 2.4GHz, or 5GHz, only antenna. The antenna operates from 2.4GHz to 7.2GHz – Wi-Fi6E compatible. Both frequency bands are present at each connector (concurrent). Peak gains of 5.5dBi at 2.4GHz, and 8dBi at 5.4GHz.
An innovative approach to omni-antennas. The OMNI-294 is a dual-polarized omni-directional antenna, capable of providing up to 2x the throughputs of traditional single-polarized antennas, maximizing the MIMO performance of the AP.
I want to order
More Info
The OMNI-294 is a dual-band omni-directional antenna, that may also be used as a 2.4GHz, or 5GHz, only antenna.
An innovative approach to omni-antennas. The OMNI-294 is a dual-polarized omni-directional antenna, capable of providing up to 2x the throughputs of traditional single-polarized antennas, maximizing the MIMO performance of the AP.
Size: 650 mm x Ø75 mm
MIMO-4-4
Frequencies: 2.4GHz&5-6GHz, 4×4 Omni-directional Antennas in our traditional PUCK design.
The MIMO-4-04 is a dual-band omni-directional antenna, that may also be used as a 2.4GHz, or 5GHz, only antenna. Both frequency bands are present at each connector (concurrent). Peak gains of 2dBi at 2.4GHz, and 6dBi at 5.4GHz.
Rugged, weather-proof and with Multiple Mounting Options, the MIMO-4-04 fits a variety of deployment scenarios.
I want to order
More Info
The MIMO-4-4 is a 4-in-1 high-performance, multi-frequency antenna with four cellular antennas within a single housing. The four cellular MIMO antennas offer wideband coverage from 617 to 6000 MHz, covering contemporary LTE/4G and 5G bands for future-proof implementation. The ultra-wideband performance of the cellular antennas allows it to be used across different operators and technologies and is ready for future cellular technologies up to 6 GHz for 5G applications. The MIMO-4-4 exceeds the performance of most competitors due to the attention to the design of this high-performance antenna. All radiating elements’ radiation patterns provide an excellent balance between omni-directionality, pattern diversity, and good radiation abilities at the desired elevation. This is an important criterion for the transportation and marine market, which the antenna was specifically designed for. Main applications are for commercial/industrial vehicles, marine, M2M, and other IoT systems using a wide range of radio technologies while remaining futureproof over the wide frequency band.
| SKU | COAX Cable Type | COAX Cable Length | Colour |
|---|---|---|---|
| A-MIMO-0004-V1-04-B | RTK-031 | 2m | Black |
| A-MIMO-0004-V1-04-W | RTK-031 | 2m | White |
| SKU | A-MIMO-0004-V1-04-B | A-MIMO-0004-V1-04-W |
|---|---|---|
| EAN | 6009710927694 | 6009710927670 |
| HS Code | 8529.10.69 (EU) 8517.71.0000 (USA) 8529.10.90 (SA & Global) |
8529.10.69 (EU) 8517.71.0000 (USA) 8529.10.90 (SA & Global) |
| Packaged Weight | 1.18kg 2.60lbs |
1.18kg 2.60lbs |
| Packaged Dimensions | 230 x 220 x 150 mm 9.05 x 8.66 x 5.9 inch |
230 x 220 x 150 mm 9.05 x 8.66 x 5.9 inch |
| Master Box QTY | 8 | 8 |
| Master Box Weight | 10.66kg 23.50lbs |
10.66kg 23.50lbs |
| Master Box Dimensions | 565 x 465 x 315 mm 22.24 x 18.31 x 12.40 inch |
565 x 465 x 315 mm 22.24 x 18.31 x 12.40 inch |
| Country of Origin | CN | CN |
WLAN-61
Frequencies: 2.4GHz&5-6GHz, 4×4 MIMO Directional Antenna, 11dBi.
The WLAN-61 is a dual-band directional antenna, that may also be used as a 2.4GHz, or 5GHz, only antenna. Both frequency bands are present at each connector (concurrent). At 2.4GHz the antenna has a 9dBi peak gain and 60º V/H apertures. At 5.4GHz the antenna has a 11dBi peak gain and 30º V/H apertures.
The antenna is 4×4, but may be used as 2×2.
I want to order
More Info
The WLAN-61 is a dual-band Wi-Fi MIMO antenna, developed by Poynting Antennas, can connect to any Wi-Fi access point whether it is older Wi-Fi technology or new dual-band Wi-Fi technology. Multiple dual-band antennas can resolve channel saturation and provide the ultimate in Wi-Fi performance and flexibility. This 4×4 MIMO antenna has 4 different antenna orientations in one enclosure. This means the antenna can be used in a 2×2, 3×3 and if necessary, a 4×4 antenna configuration. The wide beamwidth ensures good coverage in offices, halls and factories etc. The antenna operates in the two Wi-Fi frequency bands 2.4 GHz and 5 GHz, offering excellent utilization of the radio spectrum. The antenna has 9 dBi gain in the 2.4 GHz band and 11 dBi gain in the 5 GHz band, which offers the best performance with a reliable connection. The housing is made of ABS which is a high impact resistant plastic and is also resistant to acids and other chemicals that may occur in industrial plants. The antenna can be opened on the side where the 4 x SMA female connectors are placed. The cable can be fed through the bypass gland, which eliminates the joint to the antenna extension cables. This eliminates connector losses and the need for taping and waterproofing the connectors for an outdoor installation. This antenna is designed for installations where 4×4 (four independent streams), multiplexing time-space technologies is needed. It can be used indoors or outdoors and is ideal for use in warehouses, production facilities, building sites or any other environment that requires Wi-Fi connectivity, such as computers, mobile phones, tablets, and any other IoT devices.
| SKU | COAX Cable Type | COAX Cable Length | Colour | Other |
|---|---|---|---|---|
| A-WLAN-0061-V1 | N/A | N/A | Off White |
OMNI-298
Frequencies: 2.4GHz&5-7.2GHz, Omni-Directional, 2×2 MIMO Antenna.
The OMNI-294 is a dual-band omni-directional antenna, that may also be used as a 2.4GHz, or 5GHz, only antenna. The antenna operates from 2.4GHz to 7.2GHz – Wi-Fi6E compatible. Both frequency bands are present at each connector (concurrent).
Peak gains of 7dBi at 2.4GHz, and 8dBi at 5.4GHz.
I want to order
More Info
The OMNI-298 is a dual-band omni-directional antenna, that may also be used as a 2.4GHz, or 5GHz, only antenna.
An innovative approach to omni-antennas. The OMNI-294 is a dual-polarized omni-directional antenna, capable of providing up to 2x the throughputs of traditional single-polarized antennas, maximizing the MIMO performance of the AP.
Size: 650 mm x Ø75 mm
PUCK 12
Frequencies: 2.4GHz&5-7.2GHz, 2×2 Omni-directional Antennas in our traditional PUCK design. 2dBi gain at 5.4GHz.
The PUCK-12 is a dual-band omni-directional antenna, that may also be used as a 2.4GHz, or 5GHz, only antenna. The antenna operates from 2.4GHz to 7.2GHz – Wi-Fi6E compatible. Both frequency bands are present at each connector (concurrent). Peak gains of 5dBi at 2.4GHz, and 4dBi at 5.5GHz.
Rugged, weather-proof and with Multiple Mounting Options, the PUCK-12 fits a variety of deployment scenarios.
I want to order
More Info
Poynting’s new PUCK range offers a small profile antenna that can be used in the IoT/M2M, Smart Meter, Smart Utilities, Transportation, Marine, and Agricultural/Farming markets. The PUCK-12 comprises a 2-in-1 antenna system within a single housing, featuring 2×2 MIMO Wi-Fi (Dual-band 2.4 GHz & 5 GHz). The antenna provides two separate dual-band Wi-Fi antennas offering concurrent 2.4 GHz, 5 GHz, and 6GHz bands, capable of 802.11n and 802.11ac/ax/be with 2×2 MIMO. The PUCK exceeds many competitors’ performance due to the attention to the design of this high-performance antenna. The radiation patterns of all radiating elements provide an excellent balance between omnidirectionality, pattern diversity, and good radiation abilities at the desired elevation, which is often overlooked in such a small-size antenna. Despite its small size, this antenna provides excellent performance, especially at the higher frequency bands, where performance is critical for Wi-Fi throughput and connection stability.
| SKU | COAX Cable Type | COAX Cable Length | Colour | Other |
|---|---|---|---|---|
| A-PUCK-0012-V2-01 | RTK-031 | 2m | Black | |
| A-PUCK-0012-V2-01-W | RTK-031 | 2m | White |
WLAN-60
Frequencies: 2.4GHz&5-6GHz, High-gain directional Antenna.
The WLAN-60 is a dual-band directional antenna, that may also be used as a 2.4GHz, or 5GHz, only antenna. The antenna operates up to 6GHz. Both frequency bands are present at the connector (concurrent).
At 2.4GHz the antenna has a 9dBi peak gain and 40º V/H apertures.
At 5.4GHz the antenna has a 14dBi peak gain and 20º V/H apertures.
I want to order
More Info
The WLAN-60 antenna is dual-band Wi-Fi antenna, developed by Poynting Antennas. The WLAN-60 antenna is a linear high gain, dual band antenna in one enclosure. The antenna can connect to any Wi-Fi access point whether it is older Wi-Fi technology or new dual band Wi-Fi technology. The antennas can therefore be used to resolve channel saturation and provide the ultimate in Wi-Fi performance and flexibility. This means that the antenna can be used for point to point links where there is an abundance of RF noise and cluttered environments. The antenna operates in the two Wi-Fi frequency bands (2.4 GHz and 5 GHz), offering excellent utilization of the radio spectrum. The antenna has a maximum gain of 13dBi in the 2.4GHz band and 18dBi in the 5GHz band, which offers the best performance with reliable connections. The antenna also covers the 3.5 GHz CBRS band, which will be used for future 5G technologies with a peak gain of 15dBi. The housing is made of ABS which is a high impact resistant plastic and is also resistant to acids and other chemicals that may occur in industrial plants. The antenna can be opened on the side where an SMA female connector is placed. You can then feed the cable through the bypass gland, which means you do not have to join the antenna cable to extension cables. This eliminates connector losses and the need for taping and waterproofing the connectors for an outdoor installation.
| SKU | COAX Cable Type | COAX Cable Length | Colour | Other |
|---|---|---|---|---|
| A-WLAN-0060-V1 | N/A | N/A | Off White |
LPDA-500
Frequencies: 2.4GHz&5-7.2GHz, Directional Antenna.
The LPDA-500 is a dual-band directional antenna, that may also be used as a 2.4GHz, or 5GHz, only antenna. The antenna operates from 2.4GHz to 7.2GHz – Wi-Fi6E compatible. Both frequency bands are present at the connector (concurrent).
At 2.4GHz the antenna has a 11dBi peak gain and 30º V/H apertures. At 5.4GHz the antenna has a 10dBi peak gain and 20º V/H apertures.
I want to order
More Info
The LPDA-500 is Poynting’s new and improved log-periodic dipole array (LPDA) antenna. The LPDA-500 is a high-gain, ultra-wideband, uni-directional antenna that operate from 617 to 7200 MHz. The ultra-wideband coverage includes current 5G and future cellular bands as well as Wi-Fi and Wi-Fi 6E bands. The LPDA-500 has consistent high-gain performance across the entire band of operation, making the antenna suitable for the deployment of various wireless communication systems. Our previous LPDA has been successfully used in extreme weather environments across the world with close to zero failures, with the new LPDA-500 being no different. The LPDA-500 comes standard with a new and improved mounting bracket, which can be rotated at 45° intervals. This will allow for ease of installation and the customer will be able to mount multiple LPDA-500 antennas and orientate them in a MIMO configuration, i.e., vertical, and horizontal or ±45°. Poynting Antennas are well known for designing future proof antennas and the new LPDA-500 is no different.
| SKU | COAX Cable Type | COAX Cable Length | Colour | Other |
|---|---|---|---|---|
| A-LPDA-0500-V1-01 | N/A | N/A | Silver |
| SKU | A-LPDA-0500-V1-01 |
|---|---|
| EAN | 6009710925447 |
| HS Code | 8529.10.69 (EU) 8517.71.0000 (USA) 8529.10.90 (SA & Global) |
| Packaged Weight | 3.34kg 7.36lbs |
| Packaged Dimensions | 1385 x 250 x 145 mm 54.53 x 9.84 x 5.71 inch |
| Master Box QTY | 4 |
| Master Box Weight | 15.36kg 33.86lbs |
| Master Box Dimensions | 1440 x 565 x 340 mm 56.69 x 22.24 x 13.39 inch |
| Country of Origin | CN |
OMNI-296
Frequencies: 2.4GHz&5-7.2GHz, Omni-Directional, SISO Antenna.
The OMNI-296 is a dual-band omni-directional antenna, that may also be used as a 2.4GHz, or 5GHz, only antenna. The antenna operates up to 7.2GHz – Wi-Fi6E compatible. Both frequency bands are present at the connector (concurrent).
Peak gains of 7dBi at 2.4GHz, and 9dBi at 5.5GHz.
I want to order
More Info
The OMNI-296 antenna is a dual-band Wi-Fi omni-directional antenna, developed by Poynting Antennas. The antenna can connect to any Wi-Fi access point whether it is older Wi-Fi technology or new dual-band Wi-Fi technology. The antenna can therefore be used to resolve channel saturation and provide the ultimate in Wi-Fi performance and flexibility. This means that the antenna can also be used for point-to-point links where there is an abundance of RF noise and cluttered environments. The antenna operates across multiple frequency bands, i.e., 2.4 GHz, 3.3 to 4.2 GHz, and 5 to 7.2 GHz offering excellent utilization of the radio spectrum. The antenna has a maximum gain of 7dBi in the 2.4GHz band and 10dBi in the 5GHz band, which offers the best performance with reliable connections. The antenna also covers the 3.5 GHz CBRS band, which will be used for future 5G technologies with a peak gain of 8dBi. The housing is made of ABS which is a high-impact resistant plastic and is also resistant to acids and other chemicals that may occur in industrial plants. The antenna has an N-Type female connector at its base which can be connected to a cable of the desired type and length.
| SKU | COAX Cable Type | COAX Cable Length | Colour | Other |
|---|---|---|---|---|
| A-OMNI-0296-V2-01 | N/A | N/A | White |
| SKU | A-OMNI-0296-V2 |
|---|---|
| EAN | 6009710925744 |
| HS Code | 8529.10.69 (EU) 8517.71.0000 (USA) 8529.10.90 (SA & Global) |
| Packaged Weight | 0.91kg 2lbs |
| Packaged Dimensions | 510 x 95 x 95 mm 20.1 x 3.74 x 3.74 inch |
| Master Box QTY | 20 |
| Master Box Weight | 21.30kg 46.96lbs |
| Master Box Dimensions | 530 x 490 x 400 mm 20.86 x 19.29 x 15.75 inch |
| Country of Origin | CN |
OMNI-706
Frequencies: 2.4GHz&5-6GHz, Ultra-rugged Omni-Directional, SISO Antenna, Single Connector.
The OMNI-706 is part of Poynting’s Rhyno Series. A Series of ultra-rugged antennas, for the harshest environments: IP69k, IK10, operating temp. range of -40°C to +80°C and an L-Bracket made of Stainless Steel. The antenna operates up to 6GHz. Both frequency bands are present at a single (concurrent).
Peak gains of 2dBi at 2.4GHz, and 4dBi at 5.5GHz.
I want to order
More Info
The OMNI-706 is a dual band Wi-Fi, omni-directional antenna, developed by Poynting Antennas. The OMNI-706 forms part of our new POYNTING “Rhyno” antenna range and covers the 2.4 GHz and 5 – 6 GHz Wi-Fi bands, which offers excellent utilization of the radio spectrum. The antenna has a maximum gain of 4 dBi in the 2.4 GHz band and 4.8 dBi in the 5 GHz band, which offers improved performance with reliable connections. The antenna was designed with superior pattern control over the entire frequency range, making the OMNI-706 an exceptional omni-directional antenna for its size. The OMNI-706 antenna to be connected to any Wi-Fi access point, whether it is older Wi-Fi technology or new dual band Wi-Fi technology. The antenna can therefore be used to resolve channel saturation and provide the ultimate in Wi-Fi performance and flexibility. This means that the antenna can also be used for point-to-point links where there is abundance of RF noise and cluttered environments. The rugged enclosure design offers protection in adverse environmental conditions with an IP69K and IK 10 rating. The antenna comes with an N-Type female connector at its base, which can be connected to a cable of the desired type and length.
| SKU | COAX Cable Type | COAX Cable Length | Colour | Other |
|---|---|---|---|---|
| A-OMNI-0706-V1-01 | N/A | N/A | Grey |
| SKU | A-OMNI-0706-V1-01 |
|---|---|
| EAN | 6009710922224 |
| HS Code | 8529.10.69 (EU) 8517.71.0000 (USA) 8529.10.90 (SA & Global) |
| Packaged Weight | 0.4kg 0.88lbs |
| Packaged Dimensions | 236 x 80 x 96 mm 9.29 x 3.15 x 3.78 inch |
| Master Box QTY | 50 |
| Master Box Weight | 21.22kg 46.78lbs |
| Master Box Dimensions | 520 x 495 x 400 mm 20.47 x 19.49 x 15.75 inch |
| Country of Origin | CN |
OMNI-707
The OMNI-704 is part of Poynting’s Rhyno Series. A Series of ultra-rugged antennas, for the harshest environments: IP69k, IK10, operating temp. range of -40°C to +80°C and an L-Bracket made of Stainless Steel. The antenna operates up to 6GHz.
The antenna has separate connectors for each frequency band.
I want to order
More Info
The OMNI-707 is an omni-directional, dual port Wi-Fi antenna, developed by Poynting Antennas. The OMNI-707 forms part of our new “Rhyno” antenna range, making it rugged and ideal for harsh environments. The antenna covers the 2.4 GHz and 5 to 6 GHz Wi-Fi bands with a peak gain of 5.5dBi, which offers improved performance with reliable connections. The antenna was designed with superior pattern control over the entire frequency bands of operation. The OMNI-707 antenna can be connected to any Wi-Fi access point, whether it is older Wi-Fi technology or new dual band Wi-Fi technology. The antenna can be used to resolve channel saturation and provide the ultimate in Wi-Fi performance and flexibility. The antenna can also be used for point-to-point links where there is abundance of RF noise and cluttered environments. The rugged enclosure design offers protection in adverse environmental conditions with an IP69K and IK 10 rating. The antenna comes with two 0.3 m pigtail N-Type female connectors, which can then be connected to a cable of the desired type and length.
| SKU | COAX Cable Type | COAX Cable Length | Colour | Other |
|---|---|---|---|---|
| A-OMNI-0707-V1-01 | RG-58 | 0.3m | Grey |
| SKU | A-OMNI-0707-V1-01 |
|---|---|
| EAN | 6009710923344 |
| HS Code | 8529.10.69 (EU) 8517.71.0000 (USA) 8529.10.90 (SA & Global) |
| Packaged Weight | 0.63kg 1.39lbs |
| Packaged Dimensions | 386 x 80 x 96 mm 15.20 x 3.15 x 3.78 inch |
| Master Box QTY | 35 |
| Master Box Weight | 22.6kg 49.82lbs |
| Master Box Dimensions | 400 x 500 x 610 mm 15.75 x 19.69 x 24.02 inch |
| Country of Origin | CN |