Where is your router installed?

Marine

Antennas that are designed specifically for marine and coastal applications, where performance, quality, styling, and weather protection are critical.

Mobility

Reliable communication systems are essential while on the road and our antennas ensure fast and efficient data.

Building

Antennas that provide commercial and industrial users with consistent voice and data communications while reducing signal degradation.

Fixed Location 

Reliable communication will make or break the usability of your solution, therefore a good antenna is essential.

Where is your router installed?

Marine

Antennas that are designed specifically for marine and coastal applications, where performance, quality, styling, and weather protection are critical.

Mobility

Reliable communication systems are essential while on the road and our antennas ensure fast and efficient data.

Building

Antennas that provide commercial and industrial users with consistent voice and data communications while reducing signal degradation.

Fixed Location 

Reliable communication will make or break the usability of your solution, therefore a good antenna is essential.

Back

How many cellular antenna connectors has your router?

4×4 MIMO

2×2 MIMO

1×1 SISO

There are multiple ways of creating a good MIMO antenna setup. As an example: a MIMO 4×4 cellular router, may be connected to four SISO antennas, to two MIMO 2×2 antennas or, finally, to a single MIMO 4×4 antenna. This antenna selection tool will present you with 4×4, 2×2 and 1×1 antenna options. For certain installation setups, it might be beneficial to go for a mix of antenna types. For an expert’s advise, please reach out to your distributor.

Please note that this antenna selection tool only addresses the cellular (3/4/5G) connectivity.
For Wi-Fi and/or GPS antennas, please contact your distributor.

Back

In which area is your router installed?

RURAL

SUBURBAN/URBAN

In rural areas (where buildings are further spaced apart), cellular networks are mainly deployed using lower frequency bands. Contrastingly, in suburban/urban areas, the higher frequencies are the ones typically used. Your selected antenna should be one that matches this!

Back

In which area is your router installed?

RURAL

SUBURBAN/URBAN

In rural areas (where buildings are further spaced apart), cellular networks are mainly deployed using lower frequency bands. Contrastingly, in suburban/urban areas, the higher frequencies are the ones typically used. Your selected antenna should be one that matches this!

Back

In which area is your router installed?

Rural

Suburban/Urban

Back

What technologies does your router have?

3G/4G/5G

3G/4G/5G | Wi-Fi | GPS

You’re router may have multiple technologies, and you may wish to put all the antennas outside of your vehicle, or the cellular and GPS ones for example. If this is the case, choose  “3G/4G/5G | Wi-Fi | GPS”. If, on the contrary, you are only interested in placing the cellular (3G/4G/5G) antennas outside, choose the other option.

Back

Does your router have more than one connector?

YES

NO

Back

How many cellular (3G/4G/5G) connectors does your router have?

2  connectors

4 connectors

Back

Can you see your provider’s base station tower from your rooftop?

YES

NO

Depending on where you are, how tall can you install the antenna in your house/building, and if there is a unobstructed Line Of Sight (LOS) from that point to your provider’s Base Station/Tower/Antenna, you might benefit from a directional antenna. If so, if you have LOS, a directional antenna might be the best choice for you. If not, then most probably, an Omni-directional antenna (or antennas) might be better.

Be sure that the Provider’s Base Station you’re considering, is the one from your provider, meaning, from the same company from which you got the SIM card for your router.

Back

Can you place your antenna outdoors?

YES

NO

Placing your antenna outdoors, greatly benefits your cellular reception. You should always try to bring outside. However, this isn’t always possible, so we have special mounting options to help you when you need to keep the antenna inside.

Back

How many cellular antenna connectors has your router?

4

2

1

There are multiple ways of creating a good MIMO antenna setup. As an example: a MIMO 4×4 cellular router, may be connected to four SISO antennas, to two MIMO 2×2 antennas or, finally, to a single MIMO 4×4 antenna. This antenna selection tool will present you with 4×4, 2×2 and 1×1 antenna options. For certain installation setups, it might be beneficial to go for a mix of antenna types. For an expert’s advise, please reach out to your distributor.

Back

How many cellular antenna connectors has your router?

4

2

1

There are multiple ways of creating a good MIMO antenna setup. As an example: a MIMO 4×4 cellular router, may be connected to four SISO antennas, to two MIMO 2×2 antennas or, finally, to a single MIMO 4×4 antenna. This antenna selection tool will present you with 4×4, 2×2 and 1×1 antenna options. For certain installation setups, it might be beneficial to go for a mix of antenna types. For an expert’s advise, please reach out to your distributor.

Back

How many cellular antenna connectors has your router?

4

2

1

There are multiple ways of creating a good MIMO antenna setup. As an example: a MIMO 4×4 cellular router, may be connected to four SISO antennas, to two MIMO 2×2 antennas or, finally, to a single MIMO 4×4 antenna. This antenna selection tool will present you with 4×4, 2×2 and 1×1 antenna options. For certain installation setups, it might be beneficial to go for a mix of antenna types. For an expert’s advise, please reach out to your distributor.

Back

How many cellular antenna connectors has your router?

4

2

1

There are multiple ways of creating a good MIMO antenna setup. As an example: a MIMO 4×4 cellular router, may be connected to four SISO antennas, to two MIMO 2×2 antennas or, finally, to a single MIMO 4×4 antenna. This antenna selection tool will present you with 4×4, 2×2 and 1×1 antenna options. For certain installation setups, it might be beneficial to go for a mix of antenna types. For an expert’s advise, please reach out to your distributor.

Back

XPOL-24

A 4×4 MIMO, cross-polarized, Ultra-Wide Band (617 – 4200 MHz), Directional High Gain (11dBi) Antenna. Multiple cable and connector options.

The successor of the world’s favorite XPOL-2-5G, now in a 4×4 configuration.

The right balance between gain and beam aperture, to ensure max performance even if there’s some (far) obstructions in the way.

A-XPOL-0024-V1-01 (5meter cable, sma(m))

A-XPOL-0024-V1-01 (no cable, n-type connectors)

Locate a distributor
Learn More
Back

LPDA-92-LTE

A 2×2 MIMO, cross-polarized, Ultra-Wide Band (690 – 3800 MHz), Directional High Gain (11dBi) Antenna. Multiple cable and connector options.

Best in class gain and directivity between 690-2700 MHz bands, very important in rural and remote areas

For a 2×2 MIMO* configuration, choose one of the following:

1 x A-LPDA-0092-LTE

*For different MIMO configurations, contact your distributor

Locate a distributor
Learn More

XPOL-2-5G

A 2×2 MIMO, cross-polarized, Ultra-Wide Band (690 – 3800 MHz), Directional High Gain (11dBi) Antenna. Multiple cable and connector options.

A smaller form-factor, easier to install
A wider beamwidth, making it easier to align and better for near-LOS situations

For a 2×2 MIMO* configuration, choose one of the following:

A-XPOL-0002-V3-01 (5meter cable)
A-XPOL-0002-V3-02 (no cable, n-type connectors)
A-XPOL-0002-V3-03 (10meter cable)
A-XPOL-0002-V3-11 (US Specific, with 5m cable)
A-XPOL-0002-V3-12 (US Specific, no cable, n-type connectors)

*For different MIMO configurations, contact your distributor

Locate a distributor
Learn More

EPNT-2

Use it as a 2×2 MIMO, cross-polarized, Ultra-Wide Band (690 – 3800 MHz), Directional High Gain (11dBi) Antenna. ePoynt-2 is an antenna with a router enclosure, fitting routers up to 185 x 145 x 45 mm³.

Router is installed inside of the antenna: no more long coaxial cable runs.
No cable runs mean no signal loss. Guaranteed best possible performance!
A smaller form-factor, easier to install
A wider beamwidth, making it easier to align and better for near-LOS situations

1 x A-EPNT-0002-V2-01
Coaxial pigtails, to connect the router inside the enclosure, are sold independently. Order the right ones from your distributor, Poynting SKUs: A-CAB-156/15//158/159/160.

Locate a distributor
Learn More
Back

LPDA-92

Ultra-Wide Band (690 – 3800 MHz), Directional High Gain (12dBi) Antenna, 7m HDF-195 cable, w/ SMA (m) connector.

Best in class gain and directivity between 690-2700 MHz bands, very important in rural and remote areas

1 x A-LPDA-0092

Locate a distributor
Learn More
Back

XPOL-1-v2-41

A 4×4 MIMO, cross-polarized, Ultra-Wide Band (690 – 3800 MHz), Omni-directional (3dBi) Antenna, w/ 5m twin HDF-195 cables, with SMA (m) connectors options.

Small form-factor
Aesthetics minor impact (Zero troubles with the neighbours)

A-XPOL-0001-V2-41

Locate a distributor
Learn More

OMNI-214

A 4×4 MIMO Ultra-Wide Band (617-3800 MHz) Omni-directional (3.5dBi) Antenna, w/ 2m twin HDF-195 cables, with SMA (m) connectors.

Traditional form-factor
Bigger spatial diversity – antennas are vertically separated.

A-OMNI-0214-V1-01

Locate a distributor
Learn More

EPNT-1

Use it as a 4×4 MIMO, cross-polarized, Ultra-Wide Band (617 – 3800 MHz), omni-directional (5dBi) Antenna. ePoynt-1 is an antenna with a router enclosure, fitting routers up to 185 x 145 x 45 mm³..

Router is installed inside of the antenna: no more long coaxial cable runs.
No cable runs mean no signal loss. Guaranteed best possible performance!
A smaller form-factor, easier to install

1 x A-EPNT-0001-V2-01
Coaxial pigtails, to connect the router inside the enclosure, are sold independently. Order the right ones from your distributor, Poynting SKUs: A-CAB-156/15//158/159/160.

Locate a distributor
Learn More
Back

OMNI-293

Ultra-Wide Band (617 – 3800 MHz), Omni-Directional (9dBi) Antenna, N-Type connector.

Future-proof best-in-class omni-directional antenna, covering the up and coming LTE 71 (617 – 698 MHz) and the CBRS (3400 – 3800 MHz) bands

For a 2×2 MIMO* configuration:
2 x A-OMNI-0293
2 x A-CAB-xxx**

*For different MIMO configurations, contact your distributor
**Ask for the 3m, 5m, 8m, 10m black and white cable options!

Locate a distributor
Learn More

OMNI-600

A 2×2 MIMO Ultra-Wide Band (410-3800 MHz) Omni-directional (6.2dBi) Antenna, w/ 5m twin HDF-195 cables, with SMA (m) connectors.

Easier to install
All-in-one solution (antennas and cables out-of-the-box)

For a 2×2 MIMO* configuration, choose one of the following:

1 x A-OMNI-0600-V1-02

*For different MIMO configurations, contact your distributor

Locate a distributor
Learn More

EPNT-1

Use it as a 2×2 MIMO, cross-polarized, Ultra-Wide Band (617 – 3800 MHz), omni-directional (5dBi) Antenna. ePoynt-1 is an antenna with a router enclosure, fitting routers up to 185 x 145 x 45 mm³.

Router is installed inside of the antenna: no more long coaxial cable runs.
No cable runs mean no signal loss. Guaranteed best possible performance!
A smaller form-factor, easier to install

1 x A-EPNT-0001-V2-01
Coaxial pigtails, to connect the router inside the enclosure, are sold independently. Order the right ones from your distributor, Poynting SKUs: A-CAB-156/15//158/159/160.

Locate a distributor
Learn More
Back

OMNI-293

Ultra-Wide Band (617 – 3800 MHz), Omni-Directional (9dBi) Antenna, N-Type connector.

Future-proof best-in-class omni-directional antenna, covering the up and coming LTE 71 (617 – 698 MHz) and the CBRS (3400 – 3800 MHz) bands

A-OMNI-0293
A-CAB-xxx**

*Ask for the 3m, 5m, 8m, 10m black and white cable options!

Locate a distributor
Learn More

OMNI-292

Wide Band (690 – 2700 MHz) Omni-directional (8 dBi) Antenna, N-type connector.

Equivalent stellar performance on the currently broadly in-use frequency bands

A-OMNI-0292-v2
A-CAB-xxx**

*Ask for the 3m, 5m, 8m, 10m black and white cable options!

Locate a distributor
Learn More

OMNI-121

Wide Band LTE Omnidirectional Antenna, 698 – 2700MHz, max. Gain: 6 dBi, with stainless steel pole mount bracket, IP65

Budget minded option, with cable included, for easier installs.

A-OMNI-0121-V3 (8meter cable, SMA(m))
A-OMNI-0121-01-V3 (5meter cable, SMA(m))
A-OMNI-0121-02-V3 (4meter cable, TNC(m))

Locate a distributor
Learn More
Back

XPOL-1-v2-41

A 4×4 MIMO, cross-polarized, Ultra-Wide Band (690 – 3800 MHz), Omni-directional (3dBi) Antenna, w/ 5m twin HDF-195 cables, with SMA (m) connectors options.

Small form-factor
Aesthetics minor impact (Zero troubles with the neighbours)

A-XPOL-0001-V2-41

Locate a distributor
Learn More

OMNI-214

A 4×4 MIMO Ultra-Wide Band (617-3800 MHz) Omni-directional (3.5dBi) Antenna, w/ 2m twin HDF-195 cables, with SMA (m) connectors.

Traditional form-factor
Bigger spatial diversity – antennas are vertically separated.

A-OMNI-0214-V1-01

Locate a distributor
Learn More

EPNT-1

Use it as a 4×4 MIMO, cross-polarized, Ultra-Wide Band (617 – 3800 MHz), omni-directional (5dBi) Antenna. ePoynt-1 is an antenna with a router enclosure, fitting routers up to 185 x 145 x 45 mm³..

Router is installed inside of the antenna: no more long coaxial cable runs.
No cable runs mean no signal loss. Guaranteed best possible performance!
A smaller form-factor, easier to install

1 x A-EPNT-0001-V2-01
Coaxial pigtails, to connect the router inside the enclosure, are sold independently. Order the right ones from your distributor, Poynting SKUs: A-CAB-156/15//158/159/160.

Locate a distributor
Learn More
Back

OMNI-293

Ultra-Wide Band (617 – 3800 MHz), Omni-Directional (9dBi) Antenna, N-Type connector.

Future-proof best-in-class omni-directional antenna, covering the up and coming LTE 71 (617 – 698 MHz) and the CBRS (3400 – 3800 MHz) bands

For a 2×2 MIMO* configuration:
2 x A-OMNI-0293
2 x A-CAB-xxx**

*For different MIMO configurations, contact your distributor
**Ask for the 3m, 5m, 8m, 10m black and white cable options!

Locate a distributor
Learn More

OMNI-600

A 2×2 MIMO Ultra-Wide Band (410-3800 MHz) Omni-directional (6.2dBi) Antenna, w/ 5m twin HDF-195 cables, with SMA (m) connectors.

Easier to install
All-in-one solution (antennas and cables out-of-the-box)

For a 2×2 MIMO* configuration, choose one of the following:

1 x A-OMNI-0600-V1-02

*For different MIMO configurations, contact your distributor

Locate a distributor
Learn More

EPNT-1

Use it as a 2×2 MIMO, cross-polarized, Ultra-Wide Band (617 – 3800 MHz), omni-directional (5dBi) Antenna. ePoynt-1 is an antenna with a router enclosure, fitting routers up to 185 x 145 x 45 mm³.

Router is installed inside of the antenna: no more long coaxial cable runs.
No cable runs mean no signal loss. Guaranteed best possible performance!
A smaller form-factor, easier to install

1 x A-EPNT-0001-V2-01
Coaxial pigtails, to connect the router inside the enclosure, are sold independently. Order the right ones from your distributor, Poynting SKUs: A-CAB-156/15//158/159/160.

Locate a distributor
Learn More
Back

LPDA-92

Ultra-Wide Band (690 – 3800 MHz), Directional High Gain (12dBi) Antenna, 7m HDF-195 cable, w/ SMA (m) connector.

Best in class gain and directivity between 690-2700 MHz bands, very important in rural and remote areas

1 x A-LPDA-0092

Locate a distributor
Learn More
Back

XPOL-1-v2-41

A 4×4 MIMO, cross-polarized, Ultra-Wide Band (690 – 3800 MHz), Omni-directional (3dBi) Antenna, w/ 5m twin HDF-195 cables, with SMA (m) connectors options.

Small form-factor
Aesthetics minor impact (Zero troubles with the neighbours)

A-XPOL-0001-V2-41

Locate a distributor
Learn More

OMNI-214

A 4×4 MIMO Ultra-Wide Band (617-3800 MHz) Omni-directional (3.5dBi) Antenna, w/ 2m twin HDF-195 cables, with SMA (m) connectors.

Traditional form-factor
Bigger spatial diversity – antennas are vertically separated.

A-OMNI-0214-V1-01

Locate a distributor
Learn More

EPNT-1

Use it as a 4×4 MIMO, cross-polarized, Ultra-Wide Band (617 – 3800 MHz), omni-directional (5dBi) Antenna. ePoynt-1 is an antenna with a router enclosure, fitting routers up to 185 x 145 x 45 mm³..

Router is installed inside of the antenna: no more long coaxial cable runs.
No cable runs mean no signal loss. Guaranteed best possible performance!
A smaller form-factor, easier to install

1 x A-EPNT-0001-V2-01
Coaxial pigtails, to connect the router inside the enclosure, are sold independently. Order the right ones from your distributor, Poynting SKUs: A-CAB-156/15//158/159/160.

Locate a distributor
Learn More
Back

XPOL-1-5G

A 2×2 / 4×4 MIMO, cross-polarized, Ultra-Wide Band (690 – 3800 MHz), Omni-directional (3dBi) Antenna, w/ 5m twin HDF-195 cables, with SMA (m) connectors options.

Easier installation
Aesthetics minor impact (Zero troubles with the neighbours)

A-XPOL-0001-V2-21 (2×2 MIMO option)
A-XPOL-0001-V2-41 (4×4 MIMO option)

Locate a distributor
Learn More

PUCK-2

A 2×2 MIMO Ultra-Wide Band (698 – 3800 MHz), Omni-Directional (6dBi) Antenna, w/ 2m RKT-031 cable and SMA (m) connector.

Small form-factor
Multiple Mounting Options

A-PUCK-0001-V1-01
A-PUCK-0001-V1-01-W (the white version of the PUCK-1)

Locate a distributor
Learn More

A-OMNI-280

Ultra-Wide Band (698 – 3800 MHz), Omni-Directional (4dBi) Antenna, w/ multiple cable options.

Budget minded solution

For a 2×2 MIMO* choose a couple of the following options:

A-OMNI-0280-01-V1 (1m cable w/ SMA(m) connector)
A-OMNI-0280-02-V1 (2m cable w/ SMA(m) connector)/span>
A-OMNI-0280-08-V1 (2m cable w/ Right-Angle SMA(m) connector)/span>

*For different MIMO configurations, contact your distributor

Locate a distributor
Learn More
Back

PUCK-1

Ultra-Wide Band (698 – 3800 MHz), Omni-Directional (6dBi) Antenna, w/ 2m RKT-031 cable and SMA (m) connector.

Small form-factor
Multiple Mounting Options

A-PUCK-0001-V1-01-W (the white version of the PUCK-1)

Locate a distributor
Learn More

OMNI-280

Ultra-Wide Band (698 – 3800 MHz), Omni-Directional (4dBi) Antenna, w/ multiple cable options.

Budget minded solution

A-OMNI-0280-01-V1 (1m cable w/ SMA(m) connector)
A-OMNI-0280-02-V1 (2m cable w/ SMA(m) connector)
A-OMNI-0280-08-V1 (2m cable w/ Right-Angle SMA(m) connector)

Locate a distributor
Learn More
Back

OMNI-904

Ultra Wideband MIMO (4×4) Omni-directional Marine & Coastal LTE/5G, 617-3800 MHz., max. Gain: 3.5dBi & 9dBi with Marine Stainless Steel finish

Distinctive antenna design, with 2 lower gain antennas and 2 higher gain antennas inside a single housing. This unique configuration ensures the absolute best balance between reach and stability for your connection.

A-OMNI-0904-V1-01
Locate a distributor
Learn More

OMNI-914

Ultra Wideband MIMO (4×4) Omni-directional Marine & Coastal LTE/5G, 617-3800 MHz., max. Gain: 9dBi with Marine Stainless Steel finish.

This antenna houses 4 powerful omni-directional antennas inside.
Best-in-class reach and throughput guaranteed.

A-OMNI-0914-V1-01

Locate a distributor
Learn More

OMNI-414

Ultra-Wide MIMO (4×4) Omni-directional Marine & Coastal LTE/5G & Wi-Fi antenna, 617 – 3800 MHz., max. Gain: 3.5 dBi, with BRKT-40 and stainless steel pole mount options, 2m HDF-195, SMA-M, Brilliant White

Traditional Poynting Marine antenna design.
Best-in-class balance between gain and radiation diagram across its wide frequency of operation, on a 4×4 design.

 

A-OMNI-414-V1-01

Add our durable Stainless Steel mounting brackets to your order (BRKT-37/-38/39) for a great looking installation with the included BRKT-40.

Locate a distributor
Learn More
Back

OMNI-902

Ultra Wideband MIMO (2×2) Omni-directional Marine & Coastal LTE/5G, 617-3800 MHz., 9dBi with Marine Stainless Steel finish.

New Poynting’s unique antenna design, 2 powerful omni-directional antennas inside.
Best-in-class reach and throughput guaranteed.

A-OMNI-0902-V1-01
Locate a distributor
Learn More

OMNI-402

Ultra-Wide MIMO (4×4) Omni-directional Marine & Coastal LTE/5G & Wi-Fi antenna, 617 – 3800 MHz., max. Gain: 3.5 dBi, with BRKT-40 and stainless steel pole mount options, 2m HDF-195, SMA-M, Brilliant White

Traditional Poynting Marine antenna design.
Best-in-class balance between gain and radiation diagram across its very wide frequency of operation, on a 2×2 design.

A-OMNI-414-V1-01

Add our durable Stainless Steel mounting bracket to your order (BRKT-37/-38/39), for a great looking installation with the included BRKT-40.

Locate a distributor
Learn More
Back

OMNI-493

Ultra-Wide Omni-directional Marine & Coastal LTE/5G & Wi-Fi antenna, 617- 3800 MHz., max. Gain: 9dBi with BRKT-40 and stainless steel pole mount options, N-Type F Brilliant White

This antenna houses a powerful omni-directional antennas inside.
Best-in-class reach and throughput guaranteed.

A-OMNI-493-V1-01

Add our durable Stainless Steel mounting brackets to your order (BRKT-37/-38/39) for a great looking installation with the included BRKT-40.

Locate a distributor
Learn More

OMNI-291

Wide Omni-directional Marine & Coastal LTE, 450- 2700 MHz., max. Gain: 7dBi with BRKT-40 and stainless steel pole mount options, N-Type F Brilliant White

Proved antenna model specially tuned for the lower cellular frequencies.

A-OMNI-493-V1-01
Add our durable Stainless Steel mounting brackets to your order (BRKT-37/-38/39) for a great looking installation with the included BRKT-40.

Locate a distributor
Learn More

OMNI-404

Wideband Omni-directional Marine & Coastal LTE/5G & Wi-Fi antenna, 698-3800 MHz., max. Gain: 2 dBi with Marine Mount, N-Type F Brilliant White

Traditional Poynting Marine antenna design.
Minimal aesthetics impact.
Best for boats who plan to sail along the coast.

A-OMNI-0404-V1-01

Add our durable Stainless Steel mounting brackets to your order (BRKT-37/-38/39) for a great looking installation with the included BRKT-40.

Locate a distributor
Learn More
Back

MIMO-3-14

Ultra-Wide Band (450-3800MHz), High Performance 4-in-1 MIMO Omni-directional Antenna: 4x LTE/5G (5.8 dBi), w/ 2m HDF-195 cable and SMA(m) connectors.

Wider frequency bands 410 – 3800 MHz
Superior performance on lower bands 698-960 MHz
Longer reach & increased stability
Excels on remote and rural areas

A-MIMO-0003-V2-14
Locate a distributor
Learn More

MIMO-3-12

Ultra-Wide Band (450-3800MHz), High Performance 4-in-1 MIMO Omni-directional Antenna: 4x LTE/5G (5.8 dBi), w/ 2m HDF-195 cable and SMA(m) connectors

Wider frequency bands 410 – 3800 MHz
Superior performance on lower bands 698-960 MHz
Longer reach & increased stability
Excels on remote and rural areas

A-MIMO-0003-V2-12
Locate a distributor
Learn More

PUCK-2

Ultra-Wide Band (698 – 3800 MHz), Omni-Directional (6dBi) Antenna, w/ 2m RKT-031 cable and SMA (m) connector

Small Aesthetic impact
Designed for suburban and urban areas
Beats same sized competitors
Multiple Mounting Options

A-PUCK-0002-V1-01 (black version)
A-PUCK-0002-V1-01-W (white version)

Locate a distributor
Learn More
Back

PUCK-1

Ultra-Wide Band (698 – 3800 MHz), Omni-Directional (6dBi) Antenna, w/ 2m RKT-031 cable and SMA (m) connector

Small Aesthetic impact
Designed for suburban and urban areas
Beats same sized competitors
Multiple Mounting Options

A-PUCK-0001-V1-01 (black version)
A-PUCK-0001-V1-01-W (white version)
Locate a distributor
Learn More
Back